1994/02/28 Caterpillar


New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}

Usage:


Caterpillar Machines Powered By 3114 And 3116 Engines

All new and remanufactured turbochargers for 3114 and 3116 Engines that power Caterpillar machines are changing to left-hand threads in the compressor nut and on the turbine shaft. When this change is made, the turbocharger and cartridge part numbers will not change. However, the turbocharger model numbers on the turbocharger name plate will change as shown in the chart. There will be no service parts released below the cartridge group for the left-hand thread models. Complete turbochargers and cartridge groups will continue to be offered for service.

Before attempting to repair a model C2 turbocharger, check the model number on the turbocharger nameplate and verify that the model number does not contain an "L". If the model number does contain an "L", do not attempt to service this turbocharger below the cartridge level. The reasons for not servicing the cartridge groups are:

* The turbocharger shaft is easily bent during disassembly and assembly which can result in additional failures.
* The rotating assembly is balanced by the supplier and disassembly can unbalance the assembly.
* Left hand threads on nut and turbine shaft are being introduced. This will help prevent the compressor retaining nut from loosening and allowing a compressor wheel rub.

Service parts will remain available for cartridges and turbochargers with right-hand thread compressor nuts and turbine shafts. All current parts manuals and service parts systems identify parts for right-hand thread turbochargers. These parts may not work properly in left-hand thread turbochargers. However, right-hand thread turbochargers and cartridge groups will be serviced with left-hand thread turbochargers and cartridge groups.

These changes will provide a more reliable turbocharger for the customer. Remanufactured cartridges will provide a low cost service option. Additional remanufactured cartridge groups are being released to provide 100 percent coverage of remanufactured cartridges for the S2 turbochargers.

Caterpillar Information System:

1994/02/28 New Retaining Compound Is Available {0649}
1994/02/28 Soldering Iron Available For Field Use {0709,1400}
1994/02/21 Servicing Lighted Rocker Switches {1435}
1994/02/07 Fuel Injection Pump Improvements{1251}
1994/02/07 Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07 New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07 12 And 24 Volt DC Work Lights Are Available{0600}
1994/02/07 New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/01/31 Automatic Shut-Off Systems Not Recommended on Mobile Earthmoving Equipment {7418,7403}
1994/01/17 Low Coolant Level Plate In Radiator May Cause False Coolant Level Readings {1353}
1994/01/17 New Valve Cover Gasket Used {1107}
1994/01/17 New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/03/14 Articles Pertaining To Commercial Engines Or Truck Engines {0374}
1994/03/21 New Seal Used In Air Lines Group {1058}
1994/03/21 The Ninth Edition Of The Lubricating Oils Data Book Is Available From The Engine Manufactures Association (EMA) {1318}
1994/03/28 Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/04/04 Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/11 Speed Sensor Available With Improved Reliability{1907}
1994/04/25 Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25 Service Tools For Electronic Controls {0781,0782}
1994/05/16 Fuel Dilution In The Engine Oil{1290,1318}
1994/05/23 Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/30 Three And Five Piece Wheel Rims Reduce The Possibility Of The Tire Bead Not Seating Correctly{4209,4202}
1994/06/20 Installation Procedure For 1R-0716 Engine Oil Filter{1318}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.