The Ninth Edition Of The Lubricating Oils Data Book Is Available From The Engine Manufactures Association (EMA) {1318}
Usage:
Formerly, the "Lubricating Oil Data Book" was assigned a Form Number and was available through normal Caterpillar literature ordering channels. This is no longer the case. The ninth edition of the "Lubricating Oil Data Book" is available directly from the EMA. The following page includes additional information about the "Lubricating Oil Data Book" and an order form.
Caterpillar Information System:
1994/03/21 New Seal Used In Air Lines Group {1058}
1994/03/14 Articles Pertaining To Commercial Engines Or Truck Engines {0374}
1994/02/28 New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28 New Retaining Compound Is Available {0649}
1994/02/28 Soldering Iron Available For Field Use {0709,1400}
1994/02/21 Servicing Lighted Rocker Switches {1435}
1994/02/07 Fuel Injection Pump Improvements{1251}
1994/02/07 Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07 New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07 12 And 24 Volt DC Work Lights Are Available{0600}
1994/02/07 New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/01/31 Automatic Shut-Off Systems Not Recommended on Mobile Earthmoving Equipment {7418,7403}
1994/03/28 Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/04/04 Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/11 Speed Sensor Available With Improved Reliability{1907}
1994/04/25 Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25 Service Tools For Electronic Controls {0781,0782}
1994/05/16 Fuel Dilution In The Engine Oil{1290,1318}
1994/05/23 Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/30 Three And Five Piece Wheel Rims Reduce The Possibility Of The Tire Bead Not Seating Correctly{4209,4202}
1994/06/20 Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/27 New Assembly Procedure For Hydraulic Pump Groups With Double Shaft Seals And A Weep Hole Between The Seals Helps Prevent Contamination Through The Weep Hole{5073}
1994/07/04 New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/11 Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}