New Software for Integrated Brake Is Now Available for Certain 793F, 795F, and 797F Large Off-Highway Trucks {7620}
- Off-Highway Truck/Tractor:
- 793FSeries AC (S/N: EMD1-UP)
- 793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
- 795FSeries AC (S/N: ERM1-UP)
- 797F (S/N: LAJ1-UP; WSP1-UP)
New Software for Integrated Brake is now available for certain machines that are listed above. The new software for the Integrated Brake contains the following improvements:
- Removal of the code "Cab Air Temp" diagnostic
- Improvement to the "Brake Pump Pressure Not Responding to Command" (EID: 526 Level 3)
- Addition of "High Brake Pump Command" (EID: 527 Level 3)
- Improvement for the rear axle oil cooler installation status
- Added support for the brake pressure sensor failing in range detection
- Added support for the brake accumulator pressure sensors failing in range detection
- Removal of support for concept hydraulic oil temperature sensors
The new 419-6692 Machine Software Gp is a direct replacement for the existing 388-0765 Machine Software Gp. The new Machine Software Gp part number is listed in Table 1.
Show/hide table
| New Machine Software Gp | |||
|---|---|---|---|
| New Part Number | Part Name | Description | Former Part Number |
| 419-6692 | Machine Software Gp | Software Gp - Brake | 388-0765 |
Note: The new software is available in the form of a flash file through Caterpillar Service Information System (SIS). Go to SIS Web to make sure that the new flash file part number is still the latest flash file part number. A newer flash file part number may be available. SIS Web only displays the latest available flash file.
Caterpillar Information System:
2013/01/10 New Software Is Now Available for Cat® Terrain for Drilling {7605, 7620}
2013/04/04 Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2012/12/21 An Improved Transmission Harness Is Now Used for Certain Cat® Products {1408, 3167, 5736}
2012/12/24 A New Hose Assembly is Now Used in the Brake Cooling Lines Group on Certain 797F Off-Highway Truck {1365, 4257}
770G and 772G Off-Highway Truck Systems Accumulator Charging Valve
R1600H Load Haul Dump C11 Engine Supplement Coolant Level Sensor
R1600H Load Haul Dump C11 Engine Supplement Engine Mounting (Rear)
2012/12/20 Cat® Terrain Display Is Now Available With Improved Features For Certain Machine Control And Guidance Products {7490}
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Refrigerant Compressor - Remove and Install
Updating Certain Cat® Machines from EMS II to EMS III {7490, 7610, 7620} Updating Certain Cat® Machines from EMS II to EMS III {7490, 7610, 7620}
2012/12/18 An Adjusting Procedure is Available for the Exhaust Bypass Valve on High Altitude Arrangement (HAA) 797F Off-Highway Truck Engines {1057}
785G Off-Highway Truck VIMSTM and Truck Payload Measurement System ECM Software - Install
986H Wheel Loader Machine Systems Brake System Air - Purge
836K Landfill Compactor and 834K Wheel Dozer System Schematic
2013/03/01 New Suction Screen and Handle Are Used in 3500 Machine Engines {1302, 1302}
CB14B Vibratory Asphalt Compactor Machine Systems Visual Inspection
CB14B Vibratory Asphalt Compactor Machine Systems Machine Preparation for Troubleshooting
CB14B Vibratory Asphalt Compactor Machine Systems System Pressure - Release
CB14B Vibratory Asphalt Compactor Machine Systems Hydraulic Oil Contamination - Test
CB14B Vibratory Asphalt Compactor Machine Systems Gear Pump Flow - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Electrical Connector - Inspect
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Wiring Harness (Open Circuit) - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G Wiring Harness (Short Circuit) - Test
CB14B Vibratory Asphalt Compactor Machine Systems Relief Valve (Main) - Test and Adjust - Vibratory