Handrail (Rear Access) - Install
Parts and Specification Information
Show/hide table
| |
| Illustration 1 | g03388745 |
Show/hide table
| |
| Illustration 2 | g06049852 |
Note: Verifying all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
| Item | Part Number | Part Description | Qty | Specification | Approximate Weight | |
| 360-3880 Handrail Gp | ||||||
| 1 | 423-1684 | Handrail As | 1 | |||
| 2 | 423-1687 | Handrail As | 1 | |||
| 3 | 424-1910 | Gate As | 1 | |||
| 4 | 146-3287 | Special Bolts | 2 | |||
| 5 | 423-1686 | Handrail As | 1 | |||
| 6 | 9X-2133 | Hoses | 2 | |||
| 7 | 423-1685 | Handrail As | 1 | |||
| 8 | 424-1919 | Handrail As | 1 | |||
| 9 | 9X-2040 | Screws
(M10X1.5X25-MM) |
4 | |||
| 10 | 8T-4121 | Hard Washers | 8 | |||
| 11 | 479-2171 | Bolt As | 16 | |||
| 12 | 8T-4195 | Bolts
(M10X1.5X30-MM) |
8 | |||
| 13 | 424-1893 | Step As | 1 | |||
Start By:
- Install the platform (right hand).
- Install the cab.
- Use two people to install handrail assembly (13). The weight of handrail assembly (13) is approximately
26 kg (57 lb) . Install eight hard washers (10) and eight bolts (12).Show/hide table
Illustration 4 g06360508 (2) 423-1687 Handrail As
(3) 424-1910 Gate As
(4) 146-3287 Special Bolts
(5) 423-1686 Handrail As
(6) 9X-2133 Hoses
(9) 9X-2040 Screw (M10X1.5X25-MM)
(11) 479-2171 Bolt As
(14) 300-4511 Latch As
(15) 5C-7261 Nuts (M8X1.25) - Install one handrail assembly (2) , four bolt assemblies (11), and two screws (9).
- Install one handrail assembly (5), four bolt assemblies (11), and two screws (9).
- Install one gate assembly (3), two hoses (6), and two special bolts (4).
- Loosen four nuts (15) and position latch assembly (14) to secure gate assembly (3). Tighten four nuts (15).
Show/hide table
Illustration 5 g06360507 (1) 423-1684 Handrail As
(11) 479-2171 Bolt As
(16) 5P-7468 Clips
(17) 5P-7469 Clips
(18) 8T-4183 Bolts (M12X1.75X40-MM)
(19) 8T-4223 Hard Washers
(20) 8T-4244 Nuts (M12X1.75)
(21) 115-3580 Plate
(22) 8T-7087 Grommets - Install one handrail assembly (1) and four bolt assemblies (11).
- Secure handrail assembly (1) by using two clips (16), two clips (17), two bolts (18), four hard washers (19), two nuts (20), one plate (21), and two grommets (22).
Show/hide table
Illustration 6 g06360506 (7) 423-1685 Handrail As
(11) 479-2171 Bolt As
(23) 5P-7468 Clips
(24) 5P-7469 Clips
(25) 8T-4183 Bolts (M12X1.75X40-MM)
(26) 8T-4223 Hard Washers
(27) 8T-4244 Nuts (M12X1.75)
(28) 115-3580 Plate
(29) 8T-7087 Grommets - Install one handrail assembly (7) and four bolt assemblies (11).
- Secure handrail assembly (7) by using two clips (23), two clips (24), two bolts (25), four hard washers (26), two nuts (27), one plate (28), and two grommets (29).
Show/hide table
Illustration 7 g06049945 (8) 424-1919 Handrail As
(30) 5P-7468 Clips
(31) 5P-7469 Clips
(32) 8T-4194 Bolts (M12X1.75X50-MM)
(33) 8T-4223 Hard Washers
(34) 8T-4244 Nuts (M12X1.75)
(35) 8T-7087 Grommets - Install handrail assembly (8) by using four clips (30), four clips (31), four bolts (32), eight hard washers (33), four nuts (34), and four grommets (35).
Show/hide table
| |
| Illustration 3 | g06049910 |
|
(10) 8T-4121 Hard Washers
(12) 8T-4195 Bolts (M10X1.5X30-MM) (13) 424-1893 Handrail As | |
Caterpillar Information System:
826K Landfill Compactor Hydraulic Tank Breaker Relief Valve - Clean
450F Backhoe Loader Lifting and Tying Down the Machine
CD44B Vibratory Asphalt Compactor Machine Systems Piston Motor (Vibratory) - Split Drum
Procedure for Machine Dimension Measure-Up for Mining Sites with Cat® Command For Hauling {7605, 79AU} Procedure for Machine Dimension Measure-Up for Mining Sites with Cat® Command For Hauling {7605, 79AU}
CD44B Vibratory Asphalt Compactor Machine Systems Control Valve (Vibratory) - Split Drum
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks Washing System - Check
CD44B Vibratory Asphalt Compactor Machine Systems Piston Pump (Vibratory) - Split Drum
CD44B Vibratory Asphalt Compactor Machine Systems Electronic Control Module (Vibratory) - Split Drum
CW34 Pneumatic Compactor Propel System Hydraulic Schematic (Propel System)
Mechanically Attached Shrouds For Underground Mining Load/Haul/Dump Loaders{6800, 6823} Mechanically Attached Shrouds For Underground Mining Load/Haul/Dump Loaders{6800, 6823}
CD44B Vibratory Asphalt Compactor Machine Systems Operator Controls (Vibratory System) - Split Drum
793F Tier IV Off-Highway Truck Field Assembly Handrail (Front) - Install
793F Tier IV Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
770G and 772G Off-Highway Truck Systems Location of Components (Suspension Cylinder System)
450F Backhoe Loader Axles, Differential and Brakes Visual Inspection
559C and 579C Knuckleboom Loaders Defroster Fan Control
2013/02/18 Improved Gas Springs Now Used on Certain Backhoe Loaders {7310}
C13, C15, and C18 Tier 4 Final Engines DEF Temperature Is Low
826K Landfill Compactor Engine Valve Lash - Check
2012/11/02 Improved Bracket Position Helps Eliminate Belt Noise on Certain Backhoe Loaders {1802}
CD44B Vibratory Asphalt Compactor Machine Systems Electrical Schematic (Vibratory System)
559C and 579C Knuckleboom Loaders Stabilizer Control
770G and 772G Off-Highway Truck Hydraulic Fan Drive System Piston Pump (Hydraulic Fan)
793F Tier IV Off-Highway Truck Field Assembly Walkway (Right Hand) - Install