A machine may shift if improper procedures or equipment are used for lifting and tying down for transport. Ensure that proper equipment and procedures are used for lifting and tying machines down for transport. If a machine shifts it could cause personal injury or death. |
NOTICE |
---|
Improper lifting or tie-downs can allow the load to shift and cause injury or damage. |
Illustration 1 | g03316750 |
Proper lifting points are marked on the machine by this decal. |
Proper tie-down points are marked on the machine by this decal. |
Reference: Refer to Operation and Maintenance Manual, "Specifications" for the dimensions of the machine.
Note: Weights may vary with different work tools.
- Install the boom swing lock pin.
- For lifting objects, use properly rated cables and properly rated slings. Position the crane for a level machine lift.
- Spreader bar widths should be sufficient for preventing contact with the machine.
- Two rear holes and two front holes are provided for tie-downs. Use these holes.
Install the tie-downs at several locations. Install the tie-downs for the backhoe and for the bucket. Chock the front wheels and chock the rear wheels.
Check the appropriate laws that govern the weight of the load. Check the appropriate laws that govern the width of the load and the length of the load.
Consult your Cat dealer for shipping instructions for your machine.