Engine Oil Pump - Remove
拆卸步骤
开始:
- 拆下发动机油底壳。 有关正确步骤，请参阅拆解和组装, "发动机油底壳 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 如果吸油管 (1) 有支架,则将螺栓 (4) 从支架 (3) 上拆下。 松开固定夹的螺栓 (2) 。
注: 记录支架部件的位置和朝向。
Show/hide table
 | |
| 图 1 | g02367717 |
- 卸下螺栓 (5) 。 将吸油管 (1) 从油泵 (8) 上拆下。
- 拆下密封垫 (6) （未显示）。
- 拆下螺栓 (7) ，然后将发动机油泵组件 (8) 从缸体上拆下。
- 如有必要，卸下螺栓 (13) 和前盖组件 (9) 。 将外转子 (10) 从发动机机油泵的壳体上拆下。
注: 除非定位销损坏，否则不要将定位销 (11) 和 (12) 从发动机油泵壳体上拆下。
Show/hide table
 | |
| 图 2 | g02367718 |
Caterpillar Information System:
C7.1 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
CB22B, CB24B, CB32B and CC24B Utility Compactors Capacities (Refill)
C7.1 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Industrial Engine Engine Oil Filter Base - Remove and Install
C7.1 Industrial Engine Engine Oil Filter Base - Remove and Install - Engine Oil Filter Base with Adapter
CB22B, CB24B, CB32B and CC24B Utility Compactors Water Spray System Filter - Clean
C7.1 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C7.1 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
844K Wheel Dozer Systems Pump Control Valve - Pressure, Flow compensator
C7.1 Industrial Engine Flexible Exhaust Pipe - Remove and Install
C13 Tier 4 Final Engines Electronic Unit Injector - Adjust
CB22B, CB24B, CB32B and CC24B Utility Compactors Lubricant Viscosities - Fluids Recommendations
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Lubricant Viscosities - Fluids Recommendations
986H Wheel Loader Indicator Lamp - Test
CW14 Pneumatic CompactorEngine Supplement Air Cleaner - Remove and Install
CB22B, CB24B, CB32B and CC24B Utility Compactors Sound Information and Vibration Information
CB22B, CB24B, CB32B and CC24B Utility Compactors Cooling System Coolant Sample (Level 1) - Obtain
C13 Tier 4 Final Engines Electronic Unit Injector - Test
R3000H Load Haul Dump Steering System Neutralizer Valve (STIC Steering)
R3000H Load Haul Dump Power Train Selector and Pressure Control Valve (Transmission)
559C and 579C Knuckleboom Loaders Electronic Control (Hydraulic System)
2012/08/28 New Drill Monitor Arrangements Are Now Available For Use On Certain Articulated Drills {7490, 7605, 7607}