Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
拆卸步骤
开始:
- 拆下电子控制模块(ECM)的安装支架。 有关正确步骤,请参阅拆解和组装, "ECM 安装支架 - 拆卸和安装"。
Show/hide table
注意 |
---|
请确保对燃油系统进行的所有调整和修理均由经过适当培训的授权人员执行。 在燃油系统上开始任何工作之前,请参阅操作和保养手册, "一般危险信息和高压燃油管路"以了解安全信息。 有关在所有燃油系统工作期间必须遵循的清洁度标准的详细信息,请参阅系统运作,测试和调整, "燃油系统部件清洁度"。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 从冷却系统将冷却液排入合适的容器中。 有关正确的程序,请参阅操作和保养手册, "冷却系统冷却液 - 排放"。
- 如果发动机有左手侧机油滤清器,拆下机油滤清器底座。 有关正确的步骤,请参阅拆解和组装, "机油过滤器底座 - 拆卸和安装"。
如果发动机有右手侧机油滤清器,遵循步骤 2.a 至 2.c 拆下护板 (8) 。
- 拆下螺栓 (10) 。
- 拆卸护板 (8) 。
- 拆下密封垫 (9) (未显示)。
Show/hide table
图 1 | g02191813 |
- 将螺栓 (1) 从喷油管路卡箍 (2) 上拆下。 将卡箍 (2) 远离发动机机油冷却器组件放置。
- 将电缆扎带 (3) 从发动机导线线束组件上切断。
- 将塑料管组件 (4) 从曲轴箱呼吸器滤罐 (5) 和塑料管组件夹子上拆下。 有关正确的步骤,请参阅拆解和装配, "曲轴箱呼吸器 - 拆卸"。
- 将塑料管组件 (12) 从曲轴箱呼吸器滤罐 (5) 和曲轴箱呼吸器阀 (11) 上拆下。 有关正确的步骤,请参阅拆解和装配, "曲轴箱呼吸器 - 拆卸"。
- 将螺栓 (7) 从支架 (6) 上拆下。 将支架 (6) 远离发动机油冷却器放置。
- 不要将螺栓从位置 (A) 拆下。
Show/hide table
图 2 | g02191874 |
- 将螺栓 (13) 从发动机机油冷却器 (14) 上拆下来。
注: 每个螺栓的长度都不同。 记录不同螺栓的位置。 记录管组件支架的位置和方向。
- 将发动机机油冷却器组件 (14) 从缸体上拆下。
- 将密封垫 (15) (未显示)从发动机机油冷却器 (14) 上拆下。
- 如有必要,遵循步骤 12.a 至 12.c 拆解发动机机油冷却器。
- 将螺栓 (16) 从发动机机油冷却器组件 (14) 上拆下。
- 将发动机机油冷却器基体 (19) 从隔板 (17) 上拆下。
- 拆下密封垫 (18) 。
Show/hide table
图 3 | g02191814 |
Caterpillar Information System:
C7.1 Industrial Engine Engine Oil Filter Base - Remove and Install
C7.1 Industrial Engine Engine Oil Filter Base - Remove and Install - Engine Oil Filter Base with Adapter
CB22B, CB24B, CB32B and CC24B Utility Compactors Water Spray System Filter - Clean
C7.1 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C7.1 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
844K Wheel Dozer Systems Pump Control Valve - Pressure, Flow compensator
C7.1 Industrial Engine Flexible Exhaust Pipe - Remove and Install
C7.1 Industrial Engine Exhaust Manifold - Remove and Install
C7.1 Industrial Engine DEF Injector and Mounting - Remove and Install
C7.1 Industrial Engine Wastegate Solenoid - Remove and Install
C7.1 Industrial Engine Turbocharger - Install - First Stage Turbocharger
C7.1 Industrial Engine Turbocharger - Install - Second Stage Turbocharger
C7.1 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
CB22B, CB24B, CB32B and CC24B Utility Compactors Capacities (Refill)
C7.1 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Industrial Engine Engine Oil Pump - Remove
C13 Tier 4 Final Engines Electronic Unit Injector - Adjust
CB22B, CB24B, CB32B and CC24B Utility Compactors Lubricant Viscosities - Fluids Recommendations
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Lubricant Viscosities - Fluids Recommendations
986H Wheel Loader Indicator Lamp - Test
CW14 Pneumatic CompactorEngine Supplement Air Cleaner - Remove and Install
CB22B, CB24B, CB32B and CC24B Utility Compactors Sound Information and Vibration Information
CB22B, CB24B, CB32B and CC24B Utility Compactors Cooling System Coolant Sample (Level 1) - Obtain