Engine Oil Filter Base - Remove and Install - Engine Oil Filter Base with Adapter
拆卸步骤
开始:
- 拆下发动机机油滤清器底座。 有关正确步骤,请参阅拆解和装配, "发动机机油滤清器底座 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检查, 保养, 测试, 调整 和 维修发动机时,务必留心,确保将溢出的液体盛装在容器中。在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 拆卸螺栓 (1) 、螺栓 (2) 和螺栓 (3) 。
注: 记录螺栓的位置和长度。
Show/hide table
图 1 | g02047393 |
典型示例 |
- 将适配器 (6) 和隔套 (5) 从缸体上拆下。 拆下密封垫 (4) 和密封垫 (8) 。
Show/hide table
图 2 | g02047397 |
典型示例 |
- 如有必要,将开口环 (7) 从适配器 (6) 上拆下。
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 清洁适配器的密封垫表面。 清洁缸体密封垫表面。
- 将新的密封垫 (4) 和 (8) 定位到适配器 (6) 上。
Show/hide table
图 3 | g02047397 |
典型示例 |
Show/hide table
图 4 | g02047393 |
典型示例 |
- 如有必要,将开口环 (7) 安装到适配器 (6) 上。
- 将螺栓 (1) 、 (2) 和 (3) 安装到适配器 (6) 上。 将隔套 (5) 安装到相应的螺栓 (3) 上。
- 将适配器 (6) 定位到缸体上。
- 拧紧螺栓 (1) 和螺栓 (2) 至扭矩为 22 N·m (195 lb in)。 按照图 5 中所示的顺序拧紧螺栓。
拧紧位置 (X) 的螺栓 (3) 至扭矩为 44 N·m (32 lb ft)。 按照图 5 中所示的顺序拧紧螺栓。
Show/hide table
图 5 | g02047413 |
- 安装油滤清器底座。 有关正确步骤,请参阅拆解和装配, "发动机机油滤清器底座 - 拆卸和安装"。
Caterpillar Information System:
CB22B, CB24B, CB32B and CC24B Utility Compactors Water Spray System Filter - Clean
C7.1 Industrial Engine Inlet and Exhaust Valves - Remove and Install
C7.1 Industrial Engine Inlet and Exhaust Valve Springs - Remove and Install
844K Wheel Dozer Systems Pump Control Valve - Pressure, Flow compensator
C7.1 Industrial Engine Flexible Exhaust Pipe - Remove and Install
C7.1 Industrial Engine Exhaust Manifold - Remove and Install
C7.1 Industrial Engine DEF Injector and Mounting - Remove and Install
C7.1 Industrial Engine Wastegate Solenoid - Remove and Install
C7.1 Industrial Engine Turbocharger - Install - First Stage Turbocharger
C7.1 Industrial Engine Turbocharger - Install - Second Stage Turbocharger
Procedure to Upgrade the 175-0183 Support Assembly on the 777D Off-Highway Truck{0629, 0632, 0679, 7253} Procedure to Upgrade the 175-0183 Support Assembly on the 777D Off-Highway Truck{0629, 0632, 0679, 7253}
C7.1 Industrial Engine Turbocharger - Install - First Stage Turbocharger
C7.1 Industrial Engine Engine Oil Filter Base - Remove and Install
C7.1 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Industrial Engine Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
CB22B, CB24B, CB32B and CC24B Utility Compactors Capacities (Refill)
C7.1 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Industrial Engine Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Industrial Engine Engine Oil Pump - Remove
C13 Tier 4 Final Engines Electronic Unit Injector - Adjust
CB22B, CB24B, CB32B and CC24B Utility Compactors Lubricant Viscosities - Fluids Recommendations
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Lubricant Viscosities - Fluids Recommendations
986H Wheel Loader Indicator Lamp - Test
CW14 Pneumatic CompactorEngine Supplement Air Cleaner - Remove and Install