Fuel Priming Pump and Fuel Filter Base - Remove and Install
Removal Procedure
Show/hide table
 |
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
 |
- Turn the battery disconnect switch to the OFF position.
- Turn the fuel supply to the OFF position.
- Disconnect hose assembles (1). Remove bolts (2) and fuel priming pump (3) .
Show/hide table
 | |
| Illustration 1 | g03177955 |
Installation Procedure
- Install the fuel priming pump (3) in the reverse order.
Caterpillar Information System:
CB34B, CB34B XW, CB36B and CC34B Utility Compactors Operator Controls
789D and 789D XQ Off-Highway Trucks Machine Systems Seat - Remove and Install
2012/08/28 An Improved Filter Group is Now Available For Certain D5N Track-Type Tractors and 561N Pipelayers {3004, 3016, 3067}
CW14 Pneumatic CompactorEngine Supplement Battery - Remove and Install
Commissioning Procedure For the 797F and the 797F XQ Off-Highway Truck {0374, 1000, 7000, 7961} Commissioning Procedure For the 797F and the 797F XQ Off-Highway Truck {0374, 1000, 7000, 7961}
Commissioning Procedure for the 793F, 793F Tier 4, and the 793F CMD Off-Highway Truck {1000, 7000, 7961} Commissioning Procedure for the 793F, 793F Tier 4, and the 793F CMD Off-Highway Truck {1000, 7000, 7961}
PL83 and PL87 Pipelayer Systems Speed Sensor (Transmission Output)
990K Wheel Loader Systems Speed Sensor (Transmission Input)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Sensor (Steering Pilot Oil)
988K Wheel Loader Systems Pressure Sensor (Torque Converter Impeller Clutch Oil)
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Propel System Propel Lines
834K Wheel Dozer Systems and 836K Landfill Compactor Systems Modulating Valve (Torque Converter Impeller Clutch)
2012/09/06 New Onboard Software Version 6.8 Is Now Available for Cat® Terrain for Draglines on Certain Machine Control and Guidance Products {7490, 7605}
789D and 789D XQ Off-Highway Trucks Machine Systems Tire and Rim (Front) - Remove and Install
2012/09/06 A New Flywheel Speed Sensor Is Used on Certain 3500 Off-Highway Truck Engines {1907}
CW14 Pneumatic CompactorEngine Supplement Clean Emissions Module - Remove and Install
Incorrectly Machined Bearing Cage May Cause Bearing to Lose Oil Film{3075, 3159, 7551} Incorrectly Machined Bearing Cage May Cause Bearing to Lose Oil Film{3075, 3159, 7551}
CB44B and CB54B Vibratory Asphalt Compactors Engine Supplement Engine - Remove and Install
C13 Tier 4 Final Engines Air in Fuel - Test
2012/08/16 A New Bracket for the Cab on the 795F Off-Highway Truck is Now Available {4459, 7150, 7301}
270-8312 Strut Handler{0599, 0756, 7200, 7201} 270-8312 Strut Handler{0599, 0756, 7200, 7201}
2012/11/12 An Improved Proportional Control Assembly Is Now Used On Certain M Series and M Series 2 Motor Graders {5702, 7332}
2012/09/06 An Improved Hose Mounting Configuration Is Available For The Hydraulic Fan Hose On Certain Skid Steer Loaders {5057}
Tilt Cylinder Rod End Eye Bearing Installation Procedure For Certain Skid Steer Loaders {7562} Tilt Cylinder Rod End Eye Bearing Installation Procedure For Certain Skid Steer Loaders {7562}