1991/05/06 Caterpillar


Summary Of Bucket Ground Engaging Tools That Are Available For Parts Service{6800}

Usage:


Reference: Information Release Memo (IRM), GET 91-8, PELM0239, "Bucket GET Summary."

A number of changes have occurred to bucket adapters, pins and retainers. The Reference summarizes all GET parts that are currently available to clarify a parts problem that occurred when new parts were prematurely announced in the Parts Sales Kit.

Order the Reference through normal literature ordering channels.

Caterpillar Information System:

1991/04/29 Inlet Air Temperature Sensor Added And Fuel Pressure Sensor Removed From Engine Control System{1900}
1991/04/29 How To Obtain Military Manuals On Caterpillar Equipment{0374,0375}
1991/04/29 Remove And Clean Flame Arrestors At Each Top End Overhaul{1058,1087}
1991/04/22 Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01{1289}
1991/04/22 Improved Turbocharger Water Lines Group Eliminates Tube Cracking And Coolant Loss{1380,1052}
1991/04/22 Special Instruction, SEHS9340, Gives Jacket Water Heater Installation Procedures{1383}
1991/04/22 New Diagnostic Code 28 "Check Throttle Sensor Adjustment" Is On 1991 Engines{1900}
1991/04/22 6L7896 Starting Motor (24V DC) Is No Longer Available From Caterpillar{1453}
1991/04/22 Procedure To Set Voltage Droop On SR 4 Generators With VR3 Voltage Regulators Using Resistive Load Bank{4475,4467}
1991/04/22 Procedure For Applying 1U8846 Gasket Maker{0648,7555}
1991/04/15 New Oil Filter Element Assembly Used In Oil Filter Groups{1318}
1991/04/15 New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/05/06 Undersized Crankshaft And Bearings Available For 3176 Truck Engines{1202,1230}
1991/05/06 Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06 New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06 New Adjustment Values For Differential Pressure (Wastegate) Regulator{1076}
1991/05/06 New Bracket And Support Assemblies Help Prevent Cracks In Air Cleaner Housings{1051}
1991/05/06 Spacers And Longer Bolts Used For Air Inlet Adapters (Plenum Covers) To Prevent Bolt Loosening And Leaks{1058}
1991/05/06 New Altronics Interface Boxes{1552,1566}
1991/05/13 Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13 Component Changes For 1991 Model 3176 (7LGH, 43Z) Engines{1052,1087,1119,1215,1290,1292,1304,1361,1362,1378,1408,1901,1902,1912}
1991/05/13 Replacing A 3176...(2YG) Truck Engine With A 1991 3176...(7LG) Truck Engine{1000,1119,1408,1901}
1991/05/13 New Specification For Exhaust Valve Clearance{1123,1121,1105}
1991/05/13 Rear Gear (Cam Drive) Groups Improved{1206,1201,1212,7551,7552,7553}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.