424B Backhoe Loader Hydraulic and Steering System Caterpillar


Control Valve (Backhoe Bucket)(Mechanically Operated)

Usage:

424B JRC



Illustration 1g03113818

Table 1
Specification for 335-6323 Control Valve Gp    
Item     Qty     Part     Specification Description    
1     -     -     Tighten the nuts to
20 ± 2 N·m (177 ± 18 lb in).    
2     2     335-6768 Relief Valve Gp     Torque to
70 ± 7 N·m (52 ± 5 lb ft).    
3     -     -     Tighten the plug to
60 ± 6 N·m (44 ± 4 lb ft).    
4     2     257-7733 Check Valve Gp     Torque to
30 ± 3 N·m (266 ± 27 lb in).    
5     -     -     Tighten the bolts to
10 ± 1 N·m (89 ± 9 lb in).    
6     -     -     Apply Loctite 262 to the thread.    
7     -     -     Tighten the screws to
10 ± 1 N·m (89 ± 9 lb in).    
8     -     -     Tighten the adaptor to
10 ± 1 N·m (89 ± 9 lb in).    

Caterpillar Information System:

424B Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
424B Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
424B Backhoe Loader Axle Breathers - Clean/Replace
424B Backhoe Loader Hydraulic and Steering System Control Valve (Stick)(Mechanically Operated)
424B Backhoe Loader Hydraulic and Steering System Bank Valve (Seven) (Mechanically Operated)
424B Backhoe Loader Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
424B Backhoe Loader Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
3500 Generator Set Engines Gear Group (Rear)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Solenoid Valve (Steering)
424B Backhoe Loader Engine Supplement Engine and Transmission - Remove
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500} Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
2470C Wheel Feller Buncher Reference Material
424B Backhoe Loader Engine Supplement Engine and Transmission - Install
2470C Wheel Feller Buncher Safety Messages - WFB-Type Tractor
424B Backhoe Loader Hydraulic and Steering System Control Valve (Swing)(Mechanically Operated)
2570C and 2670C Wheel Feller Bunchers Additional Messages
424B Backhoe Loader Hydraulic and Steering System Control Valve (Boom)(Mechanically Operated)
563D and 573D Wheel Feller Buncher Fire Prevention and Explosion Prevention
CB54B Vibratory Asphalt Compactor Machine Systems Relief Valve (Intercircuit) - Test and Adjust - Split Drum
789D and 789D XQ Off-Highway Trucks Engine Supplement Muffler - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System Control Valve (Stabilizer) (Mechanically Operated)
2012/07/12 The Lower Tube Assembly for Power Train Oil Filler Group Can Be Reworked on Certain 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders {3005}
730C2 and 725C2 Articulated Truck Power Train Torque Converter - Disassemble
777G Off-Highway Truck Machine Systems Brake Valve and Mounting (Front Brake, Retarder Control) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.