Gear Group (Rear)
Show/hide table
Illustration 1 | g03113536 |
Show/hide table
Illustration 2 | g03113537 |
Show/hide table
Specification for 116-9856 Rear Gear Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 7E-3897 Camshaft Drive Gear | Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. Clean with alcohol wipe. |
2 | 2 | 112-1554 Idler Gear As | Bore of 125-9751 Bushing after installation is |
Installation depth is |
|||
3 | 1 | 107-2477 Idler Gear As | Bore of 4P-5438 Bushing after installation is |
Installation depth is |
|||
4 | - | - | The mark on the cluster idler gear (3) must be in alignment with the mark on the crankshaft gear (5). |
6 | 2 | 9X-8887 Bolt | Use the following procedure to tighten the bolt for the camshaft drive gears: |
1. Tighten the bolt for the camshaft drive gear to 2. Mark a vertical line on the head of the bolt for the camshaft drive gear. Refer to Illustration 2. 3. Place a driver against the retaining plate of the camshaft drive gear. Strike the driver solidly with a hammer 3 to 4 times. 4. Again, tighten the bolt for the camshaft drive gear to 5. Repeat Step 3 and Step 4 until the mark on the bolt turns a minimum of 90 degrees. Refer to Illustration 2. |
|||
7 | 2 | 112-1552 Idler Shaft | Diameter is |
8 | 4 | 1B-4367 Bolt | Torque to |
9 | 1 | 4P-5437 Gear Shaft | Diameter is |
10 | 4 | 8M-2530 Bolt | Torque to |
11 | 2 | 8S-2331 Bolt | Torque to |
12 | 2 | 101-1368 Thrust Washer | Thickness is |
Caterpillar Information System:
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Solenoid Valve (Steering)
424B Backhoe Loader Engine Supplement Engine and Transmission - Remove
Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500} Maintenance Guide For Cab Pressurization on All Caterpillar Products{0374, 0644, 0768, 7301, 7311, 7500}
2470C Wheel Feller Buncher Reference Material
2470C Wheel Feller Buncher Engine Oil and Filter - Change
2470C Wheel Feller Buncher Engine Air Filter Primary Element - Clean/Replace
789D and 789D XQ Off-Highway Trucks Engine Supplement Fuel Priming Pump - Remove and Install
2470C Wheel Feller Buncher Lubricant Viscosities
2470C Wheel Feller Buncher Lifting and Tying Down the Machine
2470C Wheel Feller Buncher Sound Information and Vibration Information
789D and 789D XQ Off-Highway Trucks Engine Supplement Refrigerant Condenser - Remove and Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Battery Disconnect Switch
424B Backhoe Loader Hydraulic and Steering System Hydraulic Hand Control (Backhoe)
424B Backhoe Loader Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
424B Backhoe Loader Hydraulic and Steering System Bank Valve (Seven) (Mechanically Operated)
424B Backhoe Loader Hydraulic and Steering System Control Valve (Stick)(Mechanically Operated)
424B Backhoe Loader Axle Breathers - Clean/Replace
424B Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
424B Backhoe Loader Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
424B Backhoe Loader Hydraulic and Steering System Control Valve (Backhoe Bucket)(Mechanically Operated)
424B Backhoe Loader Engine Supplement Engine and Transmission - Install
2470C Wheel Feller Buncher Safety Messages - WFB-Type Tractor
424B Backhoe Loader Hydraulic and Steering System Control Valve (Swing)(Mechanically Operated)
2570C and 2670C Wheel Feller Bunchers Additional Messages