Illustration 1 | g03113780 |
Position the backhoe into the service position that is shown in Illustration 1.
Illustration 2 | g03113782 |
Apply lubricant to the grease fitting (1) for the head end of the boom cylinder. Apply lubricant to the grease fitting (2) for the rod end of the boom cylinder.
Apply lubricant to the grease fitting (3) for the boom pivot. There is one grease fitting on each side of the machine.
Illustration 3 | g03113783 |
Apply lubricant to the grease fitting (9) for the head end of the stick cylinder. Apply lubricant to the grease fitting (8) for the rod end of the stick cylinder.
Apply lubricant to the grease fitting (10) for the pivot pin for the stick.
Apply lubricant to the grease fitting (7) for the head end of the bucket cylinder. Apply lubricant to the grease fitting (6) for the rod end of the bucket cylinder.
Apply lubricant to the grease fitting (11) for the pivot pin. There is one grease fitting on each side of the machine.
Apply lubricant to the grease fitting (4) for the bucket pivot pin.
Apply lubricant to the grease fitting (5) for the link. Apply lubricant to the grease fitting (12) for the pivot pin.
There is a total of 13 grease fittings.