Oscillating Hitch
Show/hide table
Illustration 1 | g02962458 |
Top view |
Show/hide table
Specification for 355-1137 Oscillating Hitch | |||
Item | Qty | Part | Specification description |
1 | 12 | 8T-2393 Bolt | Before assembly, apply blue Loctite 242 to the threads. |
2 | 1 | 305-5624 Sensor Shaft | Before assembly, apply blue Loctite 242 to the bore in pinion. |
Shaft to be locked at an angle (B) of 31 ± 4 degrees and at distance (A) of |
|||
3 | 1 | 8S-6959 Lip Type Seal | Install lip type seal so that the spring is visible and the lip is facing outward. Lubricate lip type seal lightly with the lubricant that is being sealed. |
4 | 1 | 2p-1279 Locknut | Before assembly, apply blue Loctite 242 to the threads. |
Torque to |
|||
5 | 4 | 8T-4187 Bolt | Torque to |
6 | 2 | 095-1267 Socket Setscrew | Apply blue Loctite 242 to the threads. The top face of the socket setscrews is flush with the casting. |
7 | 4 | 3K-6454 Lip Type Seal | Install lip type seals so that the spring is visible and the lips are facing outward. Lubricate lip type seals lightly with the lubricant that is being sealed. |
8 | 1 | 341-1346 Shim Pack | As required, use the following shim pack in order to obtain bearing preload:
Shim pack contains ten shims. Total thickness of shim pack is Thickness of each shim in the shim pack for five shims is Thickness of each shim in the shim pack for five shims is |
9 | 4 | 8T-9533 Setscrew | Apply blue Loctite 242 to the threads of two socket setscrews. The top () face of the socket setscrews is flush with the casting. |
10 | 2 | 320-6592 Shim Pack | As required, use the following shim pack in order to obtain bearing preload:
Shim pack contains seven shims. Total thickness of shim pack is Thickness of each shim in the shim pack for seven shims is |
11 | 4 | 9F-2247 Pipe Plug | Use the grease fitting in order to fill the cavity with 7R-4324 Lubricant. Remove the grease fittings and replace the grease fittings with pipe plugs. |
12 | 1 | 322-4648 Pinion | Before assembly, apply Loctite Gasket Maker #1 to all pinion bearing shoulders and mounting surface. |
Caterpillar Information System:
2012/03/28 A New Bevel Gear Set is Available {3254, 3256, 3258}
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Flushing Valve (Vibratory Motor) - Test
320D and 323D Excavators Machine System Specifications Hoist Solenoid Valve
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Vibratory Frequency - Test and Adjust
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Battery and Wiring Group
R1600H Load Haul Dump Braking System General Information
R1600H Load Haul Dump Machine Electronic Control System MID 039 - CID 0296 - FMI 14
R1600H Load Haul Dump Machine Electronic Control System MID 039 - CID 0296 - FMI 09
C175-16 Locomotive Engine Power Is Intermittently Low or Power Cutout Is Intermittent
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
2012/03/27 An Updated Procedure is Now Available for Servicing the Brake Charge Filter on 793F Off-Highway Trucks {5068}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051} Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
2012/06/28 A New Retainer Is Now Used In the Rear Wheel Group on the 777D Off-Highway Truck {4201}
2012/04/09 Improved Seals are Now Used for the Piston Pump on the 797 and 797B Off-Highway Trucks {5070}
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
586C Site Prep Tractor Power Train Brake Accumulator (Service)
586C Site Prep Tractor Power Train Piston Pump (Propel)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
789D and 789D XQ Off-Highway Trucks Engine Supplement Engine Trunnion - Remove and Install
789D and 789D XQ Off-Highway Trucks Engine Supplement Engine Support (Front) - Remove and Install
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Relief Valve (Steering) - Test
Procedure to Update Generator Grounding Points, Relays, and Screed Grounding Points on Certain Asphalt Pavers Equipped with the AS4251C Asphalt Screeds{1408} Procedure to Update Generator Grounding Points, Relays, and Screed Grounding Points on Certain Asphalt Pavers Equipped with the AS4251C Asphalt Screeds{1408}