320D and 323D Excavators Machine System Specifications Caterpillar


Hoist Solenoid Valve

Usage:

320D A6F


Illustration 1g03819739

Table 1
Specification for 352-7176 Solenoid Valve Gp 
Item  Qty  Part  Specification Description 
Tighten the plug to 23.5 ± 2.3 N·m (208.0 ± 20.4 lb in)
Tighten the bolts to 4.9 ± 0.5 N·m (43.4 ± 4.4 lb in)
Operating voltage is 24 VDC. 
Coil resistance at 20 °C (68 °F) is 32.0 ± 3.2 Ohms. 


Illustration 2g03819738

Table 2
Item  Qty  Part  Specification Description 
Connector  Torque to 24 ± 2 N·m (212 ± 18 lb in)
Tighten the bolts to 9.8 ± 1.0 N·m (87 ± 9 lb in)

Caterpillar Information System:

CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Vibratory Frequency - Test and Adjust
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Battery and Wiring Group
R1600H Load Haul Dump Braking System General Information
R1600H Load Haul Dump Machine Electronic Control System MID 039 - CID 0296 - FMI 14
R1600H Load Haul Dump Machine Electronic Control System MID 039 - CID 0296 - FMI 09
C175-16 Locomotive Engine Power Is Intermittently Low or Power Cutout Is Intermittent
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
2012/03/27 An Updated Procedure is Now Available for Servicing the Brake Charge Filter on 793F Off-Highway Trucks {5068}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051} Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Procedure to Repair the Rear Frame on 14M Motor Graders{7050, 7051} Procedure to Repair the Rear Frame on 14M Motor Graders{7050, 7051}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101} Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213} Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Flushing Valve (Vibratory Motor) - Test
2012/03/28 A New Bevel Gear Set is Available {3254, 3256, 3258}
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Oscillating Hitch
2012/06/28 A New Retainer Is Now Used In the Rear Wheel Group on the 777D Off-Highway Truck {4201}
2012/04/09 Improved Seals are Now Used for the Piston Pump on the 797 and 797B Off-Highway Trucks {5070}
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Magnetic Sensor (Vibratory) - Test and Adjust
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Transmission (Direct Drive) - Assemble
586C Site Prep Tractor Power Train Brake Accumulator (Service)
586C Site Prep Tractor Power Train Piston Pump (Propel)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
789D and 789D XQ Off-Highway Trucks Engine Supplement Engine Trunnion - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.