Eccentric Weight
Show/hide table
| |
| Illustration 1 | g02959418 |
Show/hide table
| Specification for 354-1645 Eccentric Weight Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 111-0895 Bearing Cone | Before assembly, clean bore of the bearing and housing shaft free from oil and rust preservative. Apply green Loctite 620 for inner bearing directly on housing at final location and repeat for out side bearing also. |
| 2 | 2 | 165-4929 Plug As | Torque to |
| 3 | 1 | 228-0446 Lip Type Seal | Before you assemble the lip type seal in housing, apply high strength/ high temperature anaerobic flange sealant to outer diameter. |
| 4 | 8 | 6V-3940 Bolt | Before assembly, apply blue Loctite 242 to the threads. |
| 5 | 8 | 6V-5842 Bolt | Before assembly, apply red Loctite 272 to the threads. |
| 6 | 2 | 228-0455 Bearing | Before assembly, apply 4C-6767 Synthetic Oil to shaft bearing journals. |
| 7 | 1 | 108-2187 Pipe Plug | Before assembly, apply red Loctite 272 to the threads. |
| 8 | 8 | 6V-4249 Bolt | Before assembly, apply red Loctite 272 to the threads. |
| 9 | 1 | 267-5641 Nut | Before assembly, apply blue Loctite 242 to the threads. |
| Torque to |
|||
| 10 | 4 | 144-1169 Hex Drive Socket | Before assembly, apply blue Loctite 242 to the threads. |
| Torque to |
|||
| 11 | 12 | 8T-4193 Bolt | Before assembly, apply blue Loctite 242 to the threads. |
| Tighten the top bolts and bottom bolts and tighten each side bolts before you tighten the other bolts. Repeat as necessary. | |||
| 12 | 1 | 352-8453 Stub Shaft | Apply 4C-6767 Synthetic Oil to shaft spline. |
| 13 | 1 | 8T-4196 Bolt | Before assembly, apply purple Loctite hi-temp flange sealant to the threads. |
| 14 | 1 | 358-0011 Cam Roller | Before assembly, apply red Loctite 272 to the threads. |
| Torque to |
|||
Caterpillar Information System:
2012/03/29 Improved Auger Bearing Is Now Used on Certain Asphalt Paver Machines {6631, 6631}
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Steering Cylinder and Mounting
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Cylinder (Steering)
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Engine Enclosure (Hood)
2012/04/04 Improvement to Hose and Elbow on 120K,120K Series 2, 12K, 140K, 140K Series 2, 160k Motor Grader, 950H, and 962H Wheel Loader {1063, 1071, 1380}
586C Site Prep Tractor Power Train Breaker Relief Valve (Hydraulic Tank)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
586C Site Prep Tractor Power Train Oil Filter (Power Train Charge Pump)
586C Site Prep Tractor Power Train Rim Group
553C Wheel Feller Buncher Engine Supplement Engine Oil Pan - Remove and Install
586C Site Prep Tractor Power Train Brake and Planetary
586C Site Prep Tractor Power Train Axle Housing
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502} Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151} Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050} Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205} Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201} Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}
Thermal Spray Procedures for 797 Hub - Pinion Drive{0679, 3256, 3258} Thermal Spray Procedures for 797 Hub - Pinion Drive{0679, 3256, 3258}
Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213} Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213} Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101} Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}