Breaker Relief Valve (Hydraulic Tank)
Show/hide table
 | |
| Illustration 1 | g03654726 |
Mounted near the top of the hydraulic tank | |
Show/hide table
| Specification for the 358-9477 Breaker Relief Valve As | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| - | Torque 20 ± 5 N·m (15± 4 lb ft) |
||
| - | Relief cracking pressure 70 ± 10 kPa (10 ± 1 psi) |
||
| - | Vacuum relief cracking pressure 0 ± 1 kPa (0 ± 0.15 psi) |
||
| - | Operating temperature is - 30° C (86° F) to 100° C (212° F) |
||
| - | 4000 hour service interval | ||
Caterpillar Information System:
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
586C Site Prep Tractor Power Train Oil Filter (Power Train Charge Pump)
586C Site Prep Tractor Power Train Rim Group
553C Wheel Feller Buncher Engine Supplement Engine Oil Pan - Remove and Install
586C Site Prep Tractor Power Train Brake and Planetary
586C Site Prep Tractor Power Train Axle Housing
586C Site Prep Tractor Power Train Differential
586C Site Prep Tractor Power Train Bevel Gear and Pinion
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Relief Valve (Charge) - Test and Adjust
586C Site Prep Tractor Power Train Transmission Gearbox
586C Site Prep Tractor Power Train Parking Brake
Bronze 393-2242 Engine Overhaul Kits for 3306 Machine Engines{1000} Bronze 393-2242 Engine Overhaul Kits for 3306 Machine Engines{1000}
2012/04/04 Improvement to Hose and Elbow on 120K,120K Series 2, 12K, 140K, 140K Series 2, 160k Motor Grader, 950H, and 962H Wheel Loader {1063, 1071, 1380}
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Engine Enclosure (Hood)
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Cylinder (Steering)
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Steering Cylinder and Mounting
2012/03/29 Improved Auger Bearing Is Now Used on Certain Asphalt Paver Machines {6631, 6631}
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Eccentric Weight
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502} Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151} Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050} Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}