Steering Cylinder and Mounting
Show/hide table
 | |
| Illustration 1 | g02959296 |
Show/hide table
| Specification for 356-0927 Steering Cylinder and Mounting Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 197-9155 Breather | Before assembly, apply blue Loctite 242 to the threads. |
| Torque to 10 ± 1 N·m (89 ± 9 lb in). |
|||
| 2 | 4 | 8T-4648 Bolt | Before assembly, apply blue Loctite 242 to the threads. |
| 3 | 8 | 8T-4138 Bolt | Before assembly, apply blue Loctite 242 to the threads. |
Caterpillar Information System:
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Cylinder (Steering)
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Engine Enclosure (Hood)
2012/04/04 Improvement to Hose and Elbow on 120K,120K Series 2, 12K, 140K, 140K Series 2, 160k Motor Grader, 950H, and 962H Wheel Loader {1063, 1071, 1380}
586C Site Prep Tractor Power Train Breaker Relief Valve (Hydraulic Tank)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
586C Site Prep Tractor Power Train Oil Filter (Power Train Charge Pump)
586C Site Prep Tractor Power Train Rim Group
553C Wheel Feller Buncher Engine Supplement Engine Oil Pan - Remove and Install
586C Site Prep Tractor Power Train Brake and Planetary
586C Site Prep Tractor Power Train Axle Housing
586C Site Prep Tractor Power Train Differential
586C Site Prep Tractor Power Train Bevel Gear and Pinion
2012/03/29 Improved Auger Bearing Is Now Used on Certain Asphalt Paver Machines {6631, 6631}
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Eccentric Weight
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502} Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151} Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050} Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205} Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201} Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}
Thermal Spray Procedures for 797 Hub - Pinion Drive{0679, 3256, 3258} Thermal Spray Procedures for 797 Hub - Pinion Drive{0679, 3256, 3258}
Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213} Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}