2012/03/29 Caterpillar


Improved Auger Bearing Is Now Used on Certain Asphalt Paver Machines {6631, 6631}

Usage:

AP-555E A5D
Asphalt Paver:
AP-1000D (S/N: EAD1-UP)
AP-1055D (S/N: FAC1-UP; A6P1-UP)
AP1000E (S/N: T1F1-UP; DKH1-UP)
AP1055E (S/N: TJF1-UP; TRS1-UP)
AP500E (S/N: JWK1-UP)
AP555E (S/N: A5D1-UP)
AP600D (S/N: TFM1-UP; TFZ1-UP)
AP655D (S/N: GNN1-UP; MAN1-UP; MAT1-UP; GNZ1-UP)
BG-2455D (S/N: BNW1-UP; BXW1-UP)
BG-260D (S/N: BPW1-UP)
BG1000E (S/N: RTT1-UP)
BG1055E (S/N: FRR1-UP)
BG500E (S/N: B5E1-UP)
BG555E (S/N: B5P1-UP)
BG600D (S/N: B6K1-UP)
BG655D (S/N: BPA1-UP; B5D1-UP)
Service Magazine SEPD1414, 23 March 2012, "Improved Auger Bearing Is Now Used on Certain Asphalt Paver Machines". Disregard this article. Refer to the article that follows.

Description of Change: A new auger bearing is now used on certain Asphalt Paver machines. The new bearing ensures grease hole alignment with improved race to housing fit increasing bearing service life.

Adaptable To:




Illustration 1g02960124

The new 382-5519 Auger Bearing (1) replaces 201-5584 Auger Bearing .

The new 382-5519 Auger Bearing (1) is adaptable to the following machines:

  • AP-1000D (S/N: EAD1-465)

  • AP1000E (S/N: T1F1-144; DKH1-109)

  • AP1055E (S/N: TJF1-158; TRS1-134)

  • AP500E (S/N: JWK1-190)

  • AP555E (S/N: A5D1-264)

  • AP-1055D (S/N: FAC1-1000; A6P1-149)

  • AP600D (S/N: TFM1-267; TFZ1-302)

  • AP655D (S/N: GNN1-288; MAN1-312; MAT1-208; GNZ1-444)

  • BG-2455D (S/N: BNW1-146; BXW1-102)

  • BG-260D (S/N: BPW1-145)

  • BG1000E (S/N: RTT1-99)

  • BG1055E (S/N: FRR1-99)

  • BG500E (S/N: B5E1-99)

  • BG555E (S/N: B5P1-99)

  • BG600D (S/N: B6K1-99)

  • BG655D (S/N: BPA1-99; B5D1-100)

The new 382-5519 Auger Bearing (1) is effective in production on the following machines:

  • AP-1000D (S/N: EAD466-UP)

  • AP1000E (S/N: T1F145-UP; DKH110-UP)

  • AP1055E (S/N: TJF159-UP; TRS135-UP)

  • AP500E (S/N: JWK191-UP)

  • AP555E (S/N: A5D265-UP)

  • AP-1055D (S/N: FAC1001-UP; A6P150-UP)

  • AP600D (S/N: TFM268-UP; TFZ303-UP)

  • AP655D (S/N: GNN289-UP; MAN313-UP; MAT209-UP; GNZ445-UP)

  • BG-2455D (S/N: BNW147-UP; BXW103-UP)

  • BG-260D (S/N: BPW146-UP)

  • BG1000E (S/N: RTT100-UP)

  • BG1055E (S/N: FRR100-UP)

  • BG500E (S/N: B5E100-UP)

  • BG555E (S/N: B5P100-UP)

  • BG600D (S/N: B6K100-UP)

  • BG655D (S/N: BPA100-UP; B5D101-UP)

Caterpillar Information System:

CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Steering Cylinder and Mounting
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Hydraulic Cylinder (Steering)
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Engine Enclosure (Hood)
2012/04/04 Improvement to Hose and Elbow on 120K,120K Series 2, 12K, 140K, 140K Series 2, 160k Motor Grader, 950H, and 962H Wheel Loader {1063, 1071, 1380}
586C Site Prep Tractor Power Train Breaker Relief Valve (Hydraulic Tank)
CP74B, CS74B, CS76B, CS78B and CS79B Vibratory Soil Compactors Machine Systems Piston Pump Neutral (Vibratory) - Test and Adjust
586C Site Prep Tractor Power Train Oil Filter (Power Train Charge Pump)
586C Site Prep Tractor Power Train Rim Group
553C Wheel Feller Buncher Engine Supplement Engine Oil Pan - Remove and Install
586C Site Prep Tractor Power Train Brake and Planetary
586C Site Prep Tractor Power Train Axle Housing
586C Site Prep Tractor Power Train Differential
CD44B and CD54B Vibratory Asphalt Compactors Machine Systems Eccentric Weight
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502} Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151} Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050} Thermal Spray Procedures for OHT Final Drive Hub {0679, 4008, 4050}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205} Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201} Thermal Spray Procedures for OHT Front Struts{0599, 0679, 7201}
Thermal Spray Procedures for 797 Hub - Pinion Drive{0679, 3256, 3258} Thermal Spray Procedures for 797 Hub - Pinion Drive{0679, 3256, 3258}
Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213} Thermal Spray Procedures for OHT Rear Strut - Head / Flange End{0374, 0599, 0679, 7201, 7213}
Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213} Thermal Spray Procedures for OHT Rear Struts{0599, 0679, 7201, 7213}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.