Transmission Gearbox - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Shackle     | 2     |
B     | 6V-3009     | Crossbar     | 1     |
8H-0663 | Bearing Puller Gp     | 1     | |
126-7181 | Sliding Plate     | 4     | |
126-7177 | Puller Leg     | 2     | |
C     | 1P-0520     | Driver     | 1     |
Start By:
- Remove the transmission gearbox.
- Remove bolts (2), nuts, and the washer. Install Tooling (A) to case (1) .
Show/hide table
Illustration 1 | g02918656 |
- Remove case (1) .
- Remove roll pin (3). Remove shifter fork (4) .
Show/hide table
Illustration 2 | g02918756 |
- Remove shaft assemblies (5). (6), and (7) .
- Install Tooling (B) and Tooling (C) in order to remove bearing (8) from shaft assembly (7) .
Show/hide table
Illustration 3 | g02918897 |
- Use a suitable press in order to remove bearing (9) from shaft assembly (7) .
Show/hide table
Illustration 4 | g02925036 |
- Install Tooling (C) and Tooling (B) in order to remove bearing (10) from shaft assembly (6) .
Show/hide table
Illustration 5 | g02925359 |
- Install Tooling (C) and Tooling (B) in order to remove bearing (11) from shaft assembly (6) .
Show/hide table
Illustration 6 | g02925376 |
- Install Tooling (B) in order to remove bearing (12) from shaft assembly (5) .
Show/hide table
Illustration 7 | g02925378 |
- Use a suitable press in order to remove bearing (13) from shaft assembly (5) .
Show/hide table
Illustration 8 | g02925379 |
- Remove gear (14) .
- Remove bearing (15) .
- Remove spacer (16). (Not shown)
- Remove retaining ring (17) and bearing (18) from gear (14) .
Show/hide table
Illustration 9 | g02930277 |
- Use a suitable press in order to remove bearing (19) from shaft assembly (5) .
Show/hide table
Illustration 10 | g02925800 |
- Remove seals (20) and bearing cups (21) from case (1) .
Show/hide table
Illustration 11 | g02925979 |
- Repeat Step 16 for the other case.
Caterpillar Information System:
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust - C3.3B Engines
450E Backhoe Loader Power Train Transmission (Power Shift) - Remove
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F and 450F Backhoe Loaders Monitoring System Module - Replace
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Transmission (Direct Drive) - Install
Adjustment Procedure for Free Play in the Slide Frame of the Seat {7324} Adjustment Procedure for Free Play in the Slide Frame of the Seat {7324}
C2.6 and C3.3B Tier 2 and EU Stage 2 Engines for Caterpillar Built Machines Lubrication System
986H Wheel Loader Emerging Symptom Information
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Oil Contamination - Test
988K XE Wheel Loader System Pressure Release
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems System Pressure - Release
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Gear Pump (Charge) - Assemble
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Systems Gear Pump (Charge) - Disassemble - Standard Flow
553C, 563C and 573C Wheel Feller Bunchers Power Train Transmission Gearbox - Assemble
2012/03/21 A New Front Window Wiper Motor Group Is Now Used on 24M Motor Graders {7305}
450F Backhoe Loader Power Train Transmission (Power Shift) - Install
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Gear Pump Flow (Steering) - Test
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Gear Pump Flow (Cooling Fan) - Test
C3.4B Engines Crankcase Breather Ejects Oil
2012/03/07 VIMSpc 2011A Update Utility Is Now Available for Certain CAT Products {7601}
C175-16 Locomotive Engine Electronic Service Tool Does Not Communicate
CP56B, CP68B, CS56B, CS66B and CS68B Vibratory Soil Compactors Machine Systems Relief Valve (Steering) - Test
416F, 420F, 422F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Power Train Tire and Rim (Rear) - Remove and Install
420F, 428F, 430F, 432F, 434F and 444F Backhoe Loaders Transmission - Standard Shift
416F, 420F, 422F, 428F, 430F, 432F, 434F, 444F and 450F Backhoe Loaders Monitoring System Module - Configure