A New Tube As Within the Transmission Oil Lines Group is Now Available for Certain Motor Graders {3016, 3154}
- Motor Grader:
- 120M (S/N: R9A1-UP; B9C1-UP; R9C1-UP; B9N1-UP; B9W1-UP; D9W1-UP)
- 12M (S/N: R9B1-UP; B9F1-UP; B9R1-UP)
- 140MSeries 2 (S/N: M9D1-UP; R9G1-UP; M9J1-UP; R9M1-UP)
- 140M (S/N: B9D1-UP; D9G1-UP)
- 160MSeries 2 (S/N: M9E1-UP; M9K1-UP; R9L1-UP)
Description of Change: A new 369-1253 Tube As within the transmission oil lines group is now available for certain Motor Graders. The updated Tube As has been designed for improved durability and design fit, allowing for longer service life and improved operation.
Adaptable To:
Show/hide table
Illustration 1 | g02715312 |
To install the new Tube As, perform the following steps:
- Replace two Bolts (2) with two 8T-4956 Bolts .
- Inspect 8T-4983 Hose Clamps (3) and replace as necessary. On machines with 300-6036 Band Clamps, remove the Band Clamps, and replace with 8T-4983 Hose Clamps .
- Install the new 369-1253 Tube As with the new hardware.
- 120M (S/N: R9A1-107; B9C1-1061; R9C1-102; B9N1-354; B9W1-209; D9W1-413)
- 12M (S/N: R9B1-106; B9F1-1361; B9R1-1760)
- 140M Series 2 (S/N: M9D1-715; R9G1-124; M9J1-459; R9M1-115)
- 140M (S/N: B9D1-3656; D9G1-1180)
- 160M Series 2 (S/N: M9E1-404; M9K1-416; R9L1-111)
- 120M (S/N: R9A108-UP; B9C1062-UP; R9C103-UP; B9N355-UP; B9W210-UP; D9W414-UP)
- 12M (S/N: R9B107-UP; B9F1362-UP; B9R1761-UP)
- 140M Series 2 (S/N: M9D716-UP; R9G125-UP; M9J460-UP; R9M116-UP)
- 140M (S/N: B9D3657-UP; D9G1181-UP)
- 160M Series 2 (S/N: M9E405-UP; M9K417-UP; R9L112-UP)
Caterpillar Information System:
Engine Oil Pressure Gauge on Monitoring System Can Appear to Indicate Oil Pressure Too Low{7450, 7490, 7620} Engine Oil Pressure Gauge on Monitoring System Can Appear to Indicate Oil Pressure Too Low{7450, 7490, 7620}
2012/05/02 New Fuel Tank Assemblies Are Now Used on 793F Off-Highway Trucks {1273}
120M Series 2 Motor Grader Engine Supplement Combustion Head - Remove and Install
2011/10/28 An Improved Platform Assembly is Now Used in the Platform Group on 793F Off-Highway Trucks {7253}
2011/10/12 Service Replacement Bolts and Seal Washers Are Available for the High-Pressure Fuel Pump on C175 Off-Highway Truck Engines {1251, 1290, 7553}
3516B and 3516C Engines for 789D Off-Highway Trucks Shutdown (Ground Level) - Test
C3.4B Engines Inlet Air Is Restricted
R1600H Load Haul Dump Steering Cylinder Bearings - Lubricate
R1600H Load Haul Dump Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) - Inspect
R1600H Load Haul Dump Rim - Inspect
R1600H Load Haul Dump Ride Control Accumulator - Check - If Equipped
R1600H Load Haul Dump Rear Axle Trunnion Bearings - Lubricate
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G General Information
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ Symptom Troubleshooting
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ Emerging Symptom Information
854K Wheel Dozer and 992K, 993K Wheel Loaders VIMSTM 3G / Product Link Using Advisor to Determine Diagnostic Codes
854K Wheel Dozer and 992K, 993K Wheel Loaders VIMSTM 3G / Product Link MID 161 - CID 0590 - FMI 14
854K Wheel Dozer and 992K, 993K Wheel Loaders VIMSTM 3G / Product Link Power Supply Circuit of Electronic Control Module
C18 Generator Set Product Description
C15 and C18 Petroleum Generator Sets Alarms and Shutoffs
R1600H Load Haul Dump Tilt Linkage Bearings - Lubricate
R1600H Load Haul Dump Tilt Cylinder and Tilt Lever Bearings - Lubricate
R1600H Load Haul Dump Tire Inflation - Check
R1600H Load Haul Dump Transmission Mounts - Inspect