Oil Filler
Usage:
Remove & Install Oil Filler
1. Remove bolt (1), the washer and nut.
2. Remove two bolts (3) and the washers that hold oil filler (2) in position. Remove the oil filler and gasket from the engine.
NOTE: The following steps are for the installation of the oil filler.
3. Check the condition of the gasket used between the oil filler and engine. If the gasket is damaged, use a new part for replacement.
4. Install the oil filler in the reverse order of removal.
Caterpillar Information System:
3114 AND 3116 DIESEL TRUCK ENGINES Water Pump Drive V-Belt
3114 AND 3116 DIESEL TRUCK ENGINES Water Pump Drive
3114 AND 3116 DIESEL TRUCK ENGINES Water Temperature Regulator
3114 AND 3116 DIESEL TRUCK ENGINES Water Pump
3114 AND 3116 DIESEL TRUCK ENGINES Air Cleaner Group
3114 AND 3116 DIESEL TRUCK ENGINES Alternator V-Belts
3114 AND 3116 DIESEL TRUCK ENGINES Alternator
Caterpillar G3500 Engines Caterpillar G3500 Engines
3114 & 3116 DIESEL TRUCK ENGINES Testing And Adjusting
3114 & 3116 DIESEL TRUCK ENGINES Systems Operation
3114 & 3116 DIESEL TRUCK ENGINES Air Compressor
3114 & 3116 DIESEL TRUCK ENGINES Fan Drive Sensor
3114 AND 3116 DIESEL TRUCK ENGINES Engine Oil Filter, Oil Filter Base & Engine Oil Cooler
3114 AND 3116 DIESEL TRUCK ENGINES Oil Level Gauge Group
3114 AND 3116 DIESEL TRUCK ENGINES Fan
3114 AND 3116 DIESEL TRUCK ENGINES Fan Drive Clutch Assembly
3114 AND 3116 DIESEL TRUCK ENGINES Fan Drive
3114 AND 3116 DIESEL TRUCK ENGINES Starting Motor
3114 AND 3116 DIESEL TRUCK ENGINES Air Compressor
3114 AND 3116 DIESEL TRUCK ENGINES Power Steer Pump Group
3114 AND 3116 DIESEL TRUCK ENGINES Fuel Priming Pump
3114 AND 3116 DIESEL TRUCK ENGINES Fuel Filter & Fuel Filter Base
3114 AND 3116 DIESEL TRUCK ENGINES Governor & Fuel Transfer Pump
3114 AND 3116 DIESEL TRUCK ENGINES Engine Support (Front)