Usage:
1. Loosen two bolts (1). Slide water pump drive (3) toward the fan drive to release the tension on V-belt (2).
2. Remove water pump drive V-belt (2) from the engine.
NOTE: The following steps are for the installation of the water pump drive V-belt.
3. Check the condition of water pump drive V-belt (2). If the V-belt is worn or damaged, use a new part for replacement.
4. Install the water pump drive V-belt in the reverse order of removal.
5. Adjust the tension of the water pump drive V-belt. See the topic "Alternator And Fan Drive Belts, Inspect/Adjust/Replace" in the 3114 & 3116 ATAAC Diesel Truck Engine Operation & Maintenance Manual, Form No. SEBU6723. Also, refer to the "Belt Tension Chart" in the 3114 & 3116 Diesel Truck Engines Specifications module, Form No. SENR6436.