CB54, CB54 XW and CB64 Vibratory Compactor Machine Systems Caterpillar


Spray Bar

Usage:

CB-54 JLM



Illustration 1g01704073

(1) Apply 6V-6640 Sealant to the threads of four plugs.

Note: First tighten the top bolt on the 40 clamps (2) in order to eliminate the visible gap.

(3) Torque for 40 bolts ... 6 ± 1 N·m (55 ± 9 lb in)

(4) Apply 6V-6640 Sealant to the threads of two drain valves.

(5) Apply 6V-6640 Sealant to the threads of four adapters.

(6) Orient the openings of nine nozzles of each of the four spray bar groups in the same direction as drain.

Caterpillar Information System:

RM-300 Reclaimer Mixer Machine Systems Water Spray Pump
C4.4 Engines for Caterpillar Built Machines Customer Specified Parameters Worksheet
120K and 120K Series 2 Motor Graders Power Train Transmission
C4.4 Engines for Caterpillar Built Machines Customer Specified Parameters Table
C4.4 Engines for Caterpillar Built Machines Customer Specified Parameters
CB54, CB54 XW and CB64 Vibratory Compactor Machine Systems Water Filter
RM-300 Reclaimer Mixer Machine Systems Water Spray Pump
CB54, CB54 XW and CB64 Vibratory Compactor Machine Systems Water Spray Pump
MINEGEM Machine Control ; Guidance Products Machine Automation System Warning Light - Check - R1300G LJB
EquipmentManager Dealer Administrator Manual Preference Detail
2008/12/08 The Seal Kits for the Suspension Groups have been Updated {7200, 7201, 7213}
2008/11/10 Improved Routing of the Hydraulic Lines for the Ride Control {5004, 5057}
2008/10/27 Replace the Two-Piece Piston if the Piston Contacts a Valve {1225}
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Connector Locations
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Diagnostic Capabilities
A New Fan Motor with a Case Drain is Available for Certain Motor Graders{1356, 1386} A New Fan Motor with a Case Drain is Available for Certain Motor Graders{1356, 1386}
C27 Engine for the AD55B Underground Articulated Truck Coolant Temperature Is High
793D Off-Highway Truck Mirror
2008/11/10 New O-Ring Seals Update the Oil Filter Group for the Transmission {3067}
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Diagnostic Trouble Code List
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5004 - FMI 3
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5004 - FMI 5
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5004 - FMI 6
325D, 330D, 345C, M325C and M330D Excavators and M325D L MH and M325D MH Material Handlers Magnet Controller Magnet Control, SPN 5005 - FMI 3
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.