RM-300 Reclaimer Mixer Machine Systems Caterpillar

Illustration 1	g01702217
Rear right view

(1) Use the following procedure in order to install the position sensor:

1. The magnetic pulse pickup which has been already assembled should be replaced with the kit for the pulse pickup.

2. Hand tighten the position sensor to full engagement.

3. Unscrew the position sensor to 1/8 of a turn and then secure the position sensor.

Illustration 2	g01702218
Top view

Illustration 3	g01702219
Right side view

(2) Torque for two bolts ... 40 ± 8 N·m (30 ± 6 lb ft)

(3) Apply 4C-9502 Gasket Sealant to the threads of three pipe fittings with brush.

(4) Apply 4C-9502 Gasket Sealant to the threads of the plug with brush.

(5) Apply 4C-9502 Gasket Sealant to the threads of the pipe with brush.

Illustration 4	g01702220
View A-A

(6) Apply 4C-9502 Gasket Sealant to the threads of the elbow with brush.

Illustration 5	g01702221
Section B-B

(7) As required, use 8C-7136 Shim in order to align the pump with the motor:

Quantity ... 12

Thickness of one shim ... 0.794 mm (0.0313 inch)

(8) Apply 4C-9502 Gasket Sealant to the threads of the coupling with brush.