422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Caterpillar


Bucket - Remove and Install - Multipurpose

Usage:

428E DXC

Removal Procedure

Start By:

  1. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".



    Illustration 1g01620206

  1. Disconnect hose assemblies (1) .



    Illustration 2g01620221

  1. Start the machine. Activate switch (2) in order to disengage the coupler pins. Lower the loader arms and back away from the bucket.

Installation Procedure




    Illustration 3g01620221

    Note: The coupler pins must be engaged in the bucket.

  1. Start the machine. Position the machine in order to engage the loader arms into the bucket. Activate switch (2) in order to engage the coupler pins.



    Illustration 4g01620206

  1. Connect hose assemblies (1) .

Caterpillar Information System:

2008/10/13 A New Seal Kit is Available for Backhoe Loaders {4303}
2009/08/31 The Position Switch for the Truck Body has been Replaced {1408, 1435, 7258}
2008/10/06 An Improved Bevel Gear Set is Now Used {3256}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Quick Coupler - Remove and Install
CB54 and CB64 Vibratory Asphalt Compactors Engine Oil Level - Check
CB54 and CB64 Vibratory Asphalt Compactors Engine Air Filter Service Indicator - Inspect
CB54 and CB64 Vibratory Asphalt Compactors Drum Scrapers - Inspect/Adjust/Replace
CB54 and CB64 Vibratory Asphalt Compactors Drum Drive Planetary Oil - Change
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Pressure Cap - Clean/Replace
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample (Level 2) - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample (Level 1) - Obtain
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Backhoe Bucket Cylinder - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Bypass Valve
2009/03/23 Improved Valve Bridges {1102, 1121, 1123}
2008/11/17 Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Oil Filter (Case Drain)
2008/11/24 An Improved Connector is Available for Certain Motor Graders {1361, 1380}
2010/04/30 Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
3500B Engines for Caterpillar Built Power Modules Engine Speed/Timing Sensor
793F WTR OEM Off-Highway Truck Hydraulic Fan and Steering System Solenoid Valve and Manifold (Rear Axle Fan, Lubrication, Steering)
C15 and C18 Petroleum Generator Sets Varistor - Check
Oil Found On 950H, 962H and IT62H Hydraulic Hose Coupling{1453, 3016} Oil Found On 950H, 962H and IT62H Hydraulic Hose Coupling{1453, 3016}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Stick Cylinder - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.