CB54 and CB64 Vibratory Asphalt Compactors Caterpillar


Cooling System Pressure Cap - Clean/Replace

Usage:

CB-64 CB5

------ WARNING! ------

Personal injury can result from hot coolant, steam and alkali.

At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.

Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.

Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.

Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.


  1. Stop the engine. Allow the cooling system to cool completely.

  2. Open the hood. Refer to the Operation and Maintenance Manual, "Access Doors and Covers" for the location of the hood.


    Illustration 1g01673216

  3. Slowly loosen the cooling system pressure cap in order to relieve the pressure. Slowly remove the cooling system pressure cap.

  4. Inspect the pressure cap and the gasket for damage. Replace the pressure cap if the cap or the gasket is damaged.

  5. Close the hood.

Caterpillar Information System:

CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample (Level 2) - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample (Level 1) - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Level - Check
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System Electrical Shutdown and Voltage Discharge
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Extender (ELC) - Add
795F AC and 795F AC XQ Off-Highway Trucks Radiator Core and Aftercooler - Clean
2009/07/20 An Improved Planetary Carrier Is Now Used on Certain Off-Highway Trucks {3160}
793F WTR OEM Off-Highway Truck Hydraulic Fan and Steering System Solenoid Valve and Manifold (Rear Axle Fan, Lubrication, Steering) - Adjust
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Speed Sensor (Hydraulic Fan Motor)
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Pressure Sensors
793F CMD Off-Highway Truck Hydraulic Fan and Steering System Pump and Motor (Rear Axle Lubrication)
CB54 and CB64 Vibratory Asphalt Compactors Drum Drive Planetary Oil - Change
CB54 and CB64 Vibratory Asphalt Compactors Drum Scrapers - Inspect/Adjust/Replace
CB54 and CB64 Vibratory Asphalt Compactors Engine Air Filter Service Indicator - Inspect
CB54 and CB64 Vibratory Asphalt Compactors Engine Oil Level - Check
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Quick Coupler - Remove and Install
2008/10/06 An Improved Bevel Gear Set is Now Used {3256}
2009/08/31 The Position Switch for the Truck Body has been Replaced {1408, 1435, 7258}
2008/10/13 A New Seal Kit is Available for Backhoe Loaders {4303}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bucket - Remove and Install - Multipurpose
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Backhoe Bucket Cylinder - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Bypass Valve
2009/03/23 Improved Valve Bridges {1102, 1121, 1123}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.