An Improved Bevel Gear Set is Now Used {3256}
- Landfill Compactor:
- 826GSeries II (S/N: AYH1-UP)
- Soil Compactor:
- 825GSeries II (S/N: AXB1-UP)
- Load Haul Dump:
- R1700 II (S/N: 4LZ1-UP)
- Wheel Loader:
- 980GSeries II (S/N: AXG1-UP; AWH1-UP; AYT1-UP)
- 826G (S/N: 7LN1-UP)
- 826H (S/N: AWF1-UP)
- 825G (S/N: 6RN1-UP)
- 825H (S/N: AZW1-UP)
- R1700G (S/N: SBR1-UP; 8XZ1-UP)
- 980G (S/N: 9CM1-UP; 2KR1-UP; 2SR1-UP)
- 980H (S/N: MHG1-UP; A8J1-UP; JMS1-UP)
Description of Change: A new bevel gear set is used on the above listed machines. The new bevel gear set offers improved service life. The improved bevel gear set prevents premature wear.
Adaptable To: The new 306-5720 Bevel Gear Set is a direct replacement for the previous 105-8730 Bevel Pinion Shaft .
The new 306-5720 Bevel Gear Set is adaptable to the machines that are listed above.
Show/hide table
Illustration 1 | g01675240 |
View of bevel pinion shaft |
Caterpillar Information System:
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Quick Coupler - Remove and Install
CB54 and CB64 Vibratory Asphalt Compactors Engine Oil Level - Check
CB54 and CB64 Vibratory Asphalt Compactors Engine Air Filter Service Indicator - Inspect
CB54 and CB64 Vibratory Asphalt Compactors Drum Scrapers - Inspect/Adjust/Replace
CB54 and CB64 Vibratory Asphalt Compactors Drum Drive Planetary Oil - Change
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Pressure Cap - Clean/Replace
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample (Level 2) - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Sample (Level 1) - Obtain
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Level - Check
795F AC and 795F AC XQ Off-Highway Truck Power Train Electronic Control System Electrical Shutdown and Voltage Discharge
CB54 and CB64 Vibratory Asphalt Compactors Cooling System Coolant Extender (ELC) - Add
2009/08/31 The Position Switch for the Truck Body has been Replaced {1408, 1435, 7258}
2008/10/13 A New Seal Kit is Available for Backhoe Loaders {4303}
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Bucket - Remove and Install - Multipurpose
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Machine Systems Backhoe Bucket Cylinder - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Filter Bypass Valve
2009/03/23 Improved Valve Bridges {1102, 1121, 1123}
2008/11/17 Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
793F and 793F XQ Off-Highway Truck Hydraulic Fan and Steering System Oil Filter (Case Drain)
2008/11/24 An Improved Connector is Available for Certain Motor Graders {1361, 1380}
2010/04/30 Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
3500B Engines for Caterpillar Built Power Modules Engine Speed/Timing Sensor
793F WTR OEM Off-Highway Truck Hydraulic Fan and Steering System Solenoid Valve and Manifold (Rear Axle Fan, Lubrication, Steering)