Upper and Lower Link (Suspension) - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 3S-6224     | 电动液压泵总成     | 1     |
9U-6815 | 拉拔器螺柱     | 1     | |
7Y-1460 | 螺母     | 1     | |
FT-3126 | 接收衬套     | 1     | |
5P-5201 | 双作用油缸     | 1     |
开始:
- 拆下后轮胎。 请参阅拆解和组装, "轮胎和轮辋(后)- 拆卸"。
- 拆下夹子 (3) 后将软管组件放到一旁。
Show/hide table
图 1 | g01659653 |
- 断开润滑脂软管 (1) 然后拆下挡块 (2) 。
- 拆下盖 (4) 。
Show/hide table
图 2 | g01659714 |
- 将适当的起吊设备连接至连杆组件 (5) 上。 连杆组件 (5) 的重量约为 417 kg (919 lb)。
Show/hide table
图 3 | g01659793 |
Show/hide table
图 4 | g01659994 |
- 将适当的起吊设备连接到工具 (A) 上。 工具 (A) 的重量约为 209 kg (460 lb)。
- 将工具 (A) 定位到销 (6) 上。 拆下销 (6) 。 销 (6) 的重量约为 77 kg (170 lb)。
- 对另一根销重复步骤 5 和 6。
- 拆下连杆组件 (5) 。
- 对其余的连杆重复步骤 1 至 8。
- 拆下每根连杆的挡圈 (7) ,然后拆下轴承 (8) 。
Show/hide table
图 5 | g01659994 |
Caterpillar Information System:
Assembly Procedure for the Coal Truck Body{7258, 7960} Assembly Procedure for the Coal Truck Body{7258, 7960}
C13, C15, and C18 Generator Set Engines Magnetic Pickup
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Rear)
C175-16 and C175-20 Engines for Off-Highway Trucks Vibration Damper
2009/06/29 An Operation and Maintenance Manual Supplement Is Now Available Regarding Inspections of the Steering Column and Maintenance of the Steering Column {4310, 4310, 4338, 4338}
2009/04/13 New Catch Assemblies are Available for the Window Group {7310}
PL61 Pipelayer Power Train Recoil Spring - Disassemble
416E, 420E and 430E Backhoe Loaders Power Train Solenoid Valve (Transmission) - Install
416E, 420E and 430E Backhoe Loaders Power Train Solenoid Valve (Transmission) - Remove
PL61 Pipelayer Power Train Recoil Spring - Assemble
12K, 120K, 140K and 160K Motor Graders Power Train Power Train Hydraulic System
PL61 Pipelayer Power Train Piston Motor (Hydrostatic) - Assemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Upper and Lower Link (Suspension) - Install
3408E and 3412E Engines for Caterpillar Built Machines Magnetic Pickup
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Transmission (Power Shift) - Remove
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Disassemble
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train Transmission (Power Shift) - Install
PL61 Pipelayer Machine Systems Hydraulic Tank and Filter - Assemble
12M Motor Grader Restricted Visibility
2008/10/06 A New Torque Converter Is Available For Backhoe Loaders {3101}
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Air Pump (Variable Pitch Fan) - If Equipped
CB54 and CB64 Vibratory Asphalt Compactors Operator Controls
795F AC and 795F AC XQ Off-Highway Trucks Engine Oil Level - Check
C9 Engine and D7E Track-Type Tractors Configuration Parameters