Radiator - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 140-7742     | Sleeve     | 1     |
B     | 189-0408     | Shackle As     | 1     |
C     | 3E-3882     | Eyebolt     | 1     |
Note: Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
- Install bracket assembly (17) onto both sides of radiator (15) .
Show/hide table
Illustration 1 | g01408319 |
- Install Tooling (B) and Tooling (C) onto a suitable lifting device and onto radiator (15). Install radiator (15). The weight of the radiator is approximately 34 kg (75 lb). Install bolts (16) .
Show/hide table
Illustration 2 | g01408309 |
Show/hide table
Illustration 3 | g01408315 |
- Position the bracket. Install nut (14). Install hose (13) .
Show/hide table
Illustration 4 | g01408304 |
- Install bolts (10) .
Show/hide table
Illustration 5 | g01408292 |
- Install plate (9) .
- Repeat Step 4 for the other side.
- Install bolts (11) .
- Install plate (12). Repeat Step 7 for the other side.
- Attach a suitable lifting device onto bracket assembly (5). Install bracket assembly (5). The weight of bracket assembly (5) is approximately 27 kg (60 lb). Install bolts (6) .
Show/hide table
Illustration 6 | g01408284 |
- Attach a suitable lifting device and Tooling (A) onto bracket assembly (8). Install bracket (8). Install bolts (7) .
- Install bolts (4).
Show/hide table
Illustration 7 | g01408280 |
- Repeat Step 11 for the opposite side.
- Install bolts (2) and (3). Install hose (1) .
Show/hide table
Illustration 8 | g01408272 |
- Fill the coolant system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
Cooling system coolant additive contains alkali. To help prevent personal injury, avoid contact with the skin and the eyes. Do not drink cooling system coolant additive. |
End By:
- Install the hydraulic oil cooler. Refer to Disassembly and Assembly, "Hydraulic Oil Cooler - Remove and Install".
- Install the engine enclosure. Refer to Disassembly and Assembly, "Emgine Enclosure - Remove and Install".
Caterpillar Information System:
770 and 772 Off-Highway Trucks Power Train Transmission Planetary and Transfer Gears - Remove
CP54 and CS54 Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Cab Tilt)
CP54 and CS54 Vibratory Soil Compactors Machine Systems Muffler
2007/08/27 A New Chassis Harness is Now Available Without a Diode Which Will Prevent Engine Overheating on Asphalt Pavers {1408}
14L Motor Grader Machine Systems Tie Rod (Steering) - Remove and Install
904B, 906 and 908 Compact Wheel Loaders, IT14G and IT28G Integrated Toolcarriers and 914G, 924G, 924GZ, 928G and 930G Wheel Loaders Steering Column Play - Check
770 and 772 Off-Highway Trucks Power Train Transmission Planetary and Transfer Gears - Connect
770 and 772 Off-Highway Trucks Power Train Transmission Planetary and Transfer Gears - Separate
2007/08/27 Changes to Testing and Adjusting, RENR4897, "216B, 226B, 232B, and 242B Skid Steer Loaders Machine Systems" , "Hydrostatic System - Test and Adjust" {4350, 4350}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Suction Fan
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Motor (Fan Drive)
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Gear Pump (Steering)
770 and 772 Off-Highway Trucks Power Train Transmission Planetary and Transfer Gears - Install
TH580B Telehandler Fuel System Primary Filter (Water Separator) Element - Replace
14M and 16M Motor Graders Machine Systems Lubrication System - If Equipped
2007/08/27 Changes to Testing and Adjusting, RENR4897, "216B, 226B, 232B, and 242B Skid Steer Loaders Machine Systems" , "Main Relief Valve - Test and Adjust" {5069, 5069}
2007/08/27 Changes to Testing and Adjusting, RENR4897, "216B, 226B, 232B, and 242B Skid Steer Loaders Machine Systems" , "Line Relief Valve - Test and Adjust" {5117, 5117}
CP76 and CS76 Vibratory Compactors Machine Systems Case Drain Flow for Piston Motor (Vibratory) - Test
2007/08/27 Changes to Testing and Adjusting, RENR4897, "216B, 226B, 232B, and 242B Skid Steer Loaders Machine Systems" , "Worksheets - Troubleshoot" {4350, 5050}
CP76 and CS76 Vibratory Compactors Machine Systems Gear Pump Flow (Cooling Fan) - Test
CS54 and CP54 Vibratory Soil Compactors Engine and Machine Warm-Up
CP54 and CS54 Vibratory Soil Compactors Machine Systems Engine Service Group
3176C Engine for the R1600G and the R1700G Load Haul Dumps Speed/Timing - Test
14M and 16M Motor Graders Machine Systems Lubrication System