Illustration 1 | g01407461 |
(1) Torque for 12 bolts ... 59.5 to 73.5 N·m (44 to 55 lb ft)
(2) Torque for four screws ... 25.0 to 52.5 N·m (18 to 39 lb ft)
(3) Torque for two bolts ... 6.5 to 13.7 N·m (60 to 120 lb in)
Note: Apply 154-9731 Thread Lock Compound to the threads of the bolts.
(4) Torque for ten bolts ... 180.5 to 199.5 N·m (135 to 145 lb ft)
(5) Torque for six nuts ... 196.4 to 242.6 N·m (145 to 180 lb ft)
(6) Torque for two breathers ... 5.0 to 10.5 N·m (45 to 95 lb in)
(7) Torque for four drain plug assemblies ... 52 to 84 N·m (38 to 60 lb ft)
(8) Torque for 20 bolts ... 209 to 231 N·m (155 to 170 lb ft)
Note: Apply 154-9731 Thread Lock Compound to the threads of the studs.
(9) Torque for 24 studs ... 35.0 to 73.5 N·m (26 to 55 lb ft)
Note: Apply 154-9731 Thread Lock Compound to the threads of the bolts.
(10) Torque for 24 bolts ... 110.5 to 136.5 N·m (80 to 100 lb ft)
(11) As required, use the following shims in order to achieve pinion bearing preload:
-
230-8932 Shim
- Quantity ... 1
- Thickness of shim ... 2.50 mm (0.098 inch)
-
230-8933 Shim
- Quantity ... 1
- Thickness of shim ... 2.60 mm (0.102 inch)
-
230-8934 Shim
- Quantity ... 1
- Thickness of shim ... 2.70 mm (0.106 inch)
-
230-8935 Shim
- Quantity ... 1
- Thickness of shim ... 2.80 mm (0.110 inch)
-
230-8936 Shim
- Quantity ... 1
- Thickness of shim ... 2.90 mm (0.114 inch)
-
230-8937 Shim
- Quantity ... 1
- Thickness of shim ... 3.00 mm (0.118 inch)
-
230-8920 Shim
- Quantity ... 1
- Thickness of shim ... 3.10 mm (0.122 inch)
-
230-8921 Shim
- Quantity ... 1
- Thickness of shim ... 3.20 mm (0.126 inch)
-
230-8922 Shim
- Quantity ... 1
- Thickness of shim ... 3.30 mm (0.130 inch)
-
230-8923 Shim
- Quantity ... 1
- Thickness of shim ... 3.40 mm (0.134 inch)
(12) Torque for four bolts ... 51.4 to 83.0 N·m (38 to 60 lb ft)