3406B INDUSTRIAL & MARINE ENGINES Caterpillar

1. Disconnect the wires from the starting motor. Put identification on the wires for correct installation.

2. Fasten a hoist to the starting motor, and remove three bolts (1) that hold the starting motor to the flywheel housing. Remove the starting motor. The weight of the starting motor is 32 kg (70 lb.).

NOTE: The following steps are for installation of the starting motor.

3. Use a hoist, and put the starting motor in position on the flywheel housing, and install three bolts (1).

4. Install wires in the correct location on the starting motor.