Fuel Priming Pump
Usage:
Remove And Install Fuel Priming Pump
1. Turn off the fuel supply.
2. Remove two bolts (2), and remove fuel priming pump (1) from the fuel filter base.
3. Remove the gasket from the fuel priming pump.
NOTE: The following steps are for installation of the fuel priming pump.
4. Put the gasket and fuel priming pump in position on the fuel filter base, and install two bolts (2).
5. Turn on the fuel supply.
Caterpillar Information System:
3406B INDUSTRIAL & MARINE ENGINES Sump Pump
3406B INDUSTRIAL & MARINE ENGINES Electric Starting Motor
3406B INDUSTRIAL & MARINE ENGINES Tachometer Drive
3406B INDUSTRIAL & MARINE ENGINES Service Meter
3406B INDUSTRIAL & MARINE ENGINES Instrument Panel
3406B INDUSTRIAL & MARINE ENGINES Engine Rear Support
3406B INDUSTRIAL & MARINE ENGINES Engine Front Support
3406B INDUSTRIAL & MARINE ENGINES Crankshaft Vibration Damper And Pulley
3406B INDUSTRIAL & MARINE ENGINES Air Cleaner
3406B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Testing And Adjusting
3406B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Systems Operation
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Gauge For Transmission Oil Pressure (1W4126)
3406B INDUSTRIAL & MARINE ENGINES Fuel Filter Base
3406B INDUSTRIAL & MARINE ENGINES Sea Water Pump
3406B INDUSTRIAL & MARINE ENGINES Accessory Drive
3406B INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES Automatic Timing Advance
3406B INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES Governor
3406B INDUSTRIAL & MARINE ENGINES Fuel Injection Pumps