3406B INDUSTRIAL & MARINE ENGINES Caterpillar


Crankshaft Vibration Damper And Pulley

Usage:

Remove Crankshaft Vibration Damper And Pulley

1. Remove the top bolt from pulley (2), and install a 5/8"-18 NF guide bolt (1) in the crankshaft.

2. Remove the remainder of the bolts and pulley (2) from the vibration damper.

3. Remove vibration damper (3) from the adapter.

4. Remove adapter (4) from the crankshaft.

Install Crankshaft Vibration Damper And Pulley

1. Install a 5/8"-18 NF guide bolt (2) in the crankshaft.

2. Put adapter (1) in position on the crankshaft.


NOTICE

The vibration damper has marks (3) on the hub and ring. These marks show an indication of the condition of the vibration damper. If the marks are not in alignment, install a new damper.


3. Put vibration damper (4) in position on the adapter.

4. Put pulley (5) in position on the vibration damper, and install the bolts.

Caterpillar Information System:

3406B INDUSTRIAL & MARINE ENGINES Air Cleaner
3406B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Testing And Adjusting
3406B INDUSTRIAL & MARINE ENGINE ATTACHMENTS Systems Operation
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Gauge For Transmission Oil Pressure (1W4126)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Shut-Off Solenoids 6T8021, 6T8022, 6T8023, 9G8180
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Shut-Off Solenoids
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Magnetic Pick-up
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Circuit Breakers
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Magnetic Switch (Used with electric starting and air shut-off systems)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Time Delay Relay 5N2124 (Dynalco Corp. Number DSC-9)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Jacket Water Heater 5N5739 120 VAC, 3000 Watts; 5N5740 240 VAC, 3000 Watts
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS Pressure Switch Terminal No. 2 Is Normally Open;Terminal No. 3 is Normally Closed
3406B INDUSTRIAL & MARINE ENGINES Engine Front Support
3406B INDUSTRIAL & MARINE ENGINES Engine Rear Support
3406B INDUSTRIAL & MARINE ENGINES Instrument Panel
3406B INDUSTRIAL & MARINE ENGINES Service Meter
3406B INDUSTRIAL & MARINE ENGINES Tachometer Drive
3406B INDUSTRIAL & MARINE ENGINES Electric Starting Motor
3406B INDUSTRIAL & MARINE ENGINES Sump Pump
3406B INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
3406B INDUSTRIAL & MARINE ENGINES Fuel Filter Base
3406B INDUSTRIAL & MARINE ENGINES Sea Water Pump
3406B INDUSTRIAL & MARINE ENGINES Accessory Drive
3406B INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.