Usage:
1. Fasten a hoist to the front lifting bracket on the engine.
2. Remove the bolts that hold the engine front support to the frame rails. Loosen the bolts that hold the rear support to the frame rail.
Marine Engine
Industrial Engine
3. Use the hoist and raise the front of the engine. The weight of the front of the engine is approximately 998 kg (2200 lb.).
4. Remove eight bolts (1), and remove engine front support (2). The weight of the front support for the marine engine is approximately 32 kg (70 lb.).
NOTE: The following steps are for installation of the engine front support.
5. Put engine front support (2) in position on the engine, and install eight bolts (1).
6. Lower the engine to the frame rails, and install the bolts that hold the engine front support to the frame rails. Tighten the bolts in the rear support.