Ride Control Accumulator
Show/hide table
 | |
| Illustration 1 | g01445194 |
Maximum operating pressure ... 35000 kPa (5076 psi)
Minimum operating temperature ... −32 °C (−26 °F)
Maximum operating temperature ... 160 °C (320 °F)
Maximum capacity of container ... 1.90 L (2.00 qt)
Internal volume of compartment for gas ... 2.06 L (2.18 qt)
(1) Torque for the cap ... 1.6 ± 0.1 N·m (14.00 ± 1.00 lb in)
(2) Torque for the valve ... 35 ± 10 N·m (26 ± 8 lb ft)
(3) Torque for the end cap ... 217 ± 10 N·m (160 ± 7 lb ft)
Note: The 259-4691 Ride Control Accumulator Group is the service replacement for 259-4685 Ride Control Accumulator Group. The accumulator is uncharged. The accumulator must be charged before you install the accumulator on the machine.
Caterpillar Information System:
14M and 16M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan Speed - Calibrate and Adjust
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Bogie Wheel - Install
12M Motor Grader Before Operation
2007/08/13 New Support Bracket {1351, 1355, 1361}
2007/07/16 A Revised Adjustment Procedure For The Boom Chain Is Now Available {6460}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
Performance Issues with 725, 730, 735, 740, and 745 Articulated Trucks{1000, 3030, 3101} Performance Issues with 725, 730, 735, 740, and 745 Articulated Trucks{1000, 3030, 3101}
2007/07/16 High Copper Reported in Routine Engine Oil Samples {1308, 1318, 1348}
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan Speed - Calibrate and Adjust
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan Speed - Test
2007/09/10 A new Shimming Procedure for the Bodies on Large Off-Highway Trucks {7258, 7960}
3412E Engine for Caterpillar Built Machines Speed/Timing - Test
770 and 772 Off-Highway Trucks Power Train Filter (Power Train) - Remove
770 and 772 Off-Highway Trucks Power Train Filter (Power Train) - Install
24M Motor Grader Power Train Torque Converter Inlet Oil Pressure - Test
160M Motor Grader Power Train Transmission - Install
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower)
C11 and C13 Engines and 14M and 16M Motor Graders Sensor Signal (Analog, Passive) - Test
24M Motor Grader Hydraulic and Steering System Location of Components
587R Pipelayer Machine Systems Pipelayer Frame - Remove
587R Pipelayer Machine Systems Pipelayer Frame - Install
770 and 772 Off-Highway Trucks Power Train Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
770 and 772 Off-Highway Trucks Power Train Lockup Clutch and Solenoid Valve (Torque Converter) - Install
C18 Engine for Caterpillar Built Machines Sensor Supply - Test