Filter (Power Train) - Install
安装步骤
注: 清洁度是一项重要的因素。 安装步骤开始之前，应彻底清洁部件外部。 这有助于防止尘土进入内部结构。
- 安置滤清器底座 (3) ，然后安装螺栓 (2) 。
Show/hide table
 | |
| 图 1 | g01396230 |
- 连接管组件 (5) 后连接线束组件 (1) 。
- 安装滤芯 (4) 。 请参阅操作和保养手册, "油滤清器（动力传动系）- 更换"。
Caterpillar Information System:
770 and 772 Off-Highway Trucks Power Train Filter (Power Train) - Remove
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Ride Control Accumulator
14M and 16M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan Speed - Calibrate and Adjust
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Power Train Bogie Wheel - Install
12M Motor Grader Before Operation
2007/08/13 New Support Bracket {1351, 1355, 1361}
2007/07/16 A Revised Adjustment Procedure For The Boom Chain Is Now Available {6460}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
Performance Issues with 725, 730, 735, 740, and 745 Articulated Trucks{1000, 3030, 3101} Performance Issues with 725, 730, 735, 740, and 745 Articulated Trucks{1000, 3030, 3101}
2007/07/16 High Copper Reported in Routine Engine Oil Samples {1308, 1318, 1348}
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan Speed - Calibrate and Adjust
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Hydraulic Fan Speed - Test
24M Motor Grader Power Train Torque Converter Inlet Oil Pressure - Test
160M Motor Grader Power Train Transmission - Install
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower)
C11 and C13 Engines and 14M and 16M Motor Graders Sensor Signal (Analog, Passive) - Test
24M Motor Grader Hydraulic and Steering System Location of Components
587R Pipelayer Machine Systems Pipelayer Frame - Remove
587R Pipelayer Machine Systems Pipelayer Frame - Install
770 and 772 Off-Highway Trucks Power Train Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
770 and 772 Off-Highway Trucks Power Train Lockup Clutch and Solenoid Valve (Torque Converter) - Install
C18 Engine for Caterpillar Built Machines Sensor Supply - Test
2007/07/16 Improved Fuel Lines on Landfill Compactors {1274}
770 and 772 Off-Highway Trucks Power Train Lockup Clutch and Solenoid Valve (Torque Converter) - Assemble