Transmission Hydraulic Control Valve - Remove
Removal Procedure
Start By:
- Remove the priority valve. Refer to Disassembly and Assembly, "Priority Valve - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1). Position cable assembly (2) out of the way.
Show/hide table
Illustration 1 | g01388829 |
- Remove bolts (4). Position cable assembly (3) out of the way.
- Remove bolts (5). Use two people in order to remove transmission hydraulic control valve (6). The weight of transmission hydraulic control valve (6) is approximately 34 kg (75 lb).
Show/hide table
Illustration 2 | g01388841 |
Caterpillar Information System:
EquipmentManager Dealer Administrator Manual Enable Program
770 and 772 Off-Highway Truck/Tractors Metering Pump (Steering) - Remove and Install
0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225} 0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225}
584 and 584HD Forwarders Slope Operation
24M Motor Grader Hydraulic and Steering System Piston Pump (Implement and Steering)
AP655D and BG655D Asphalt Pavers Machine Systems General Information (Auxiliary Hydraulic System)
16M Motor Grader Machine Systems Piston Pump (Hydraulic Fan) - Assemble
EquipmentManager User Guide Getting Started
16M Motor Grader Machine Systems Piston Pump (Hydraulic Fan) - Disassemble
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Oil Filter (Power Train)
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Oil Pump
CS54 and CP54 Vibratory Soil Compactors Hydraulic Tank Vent - Replace
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Loader)
24M Motor Grader Hydraulic and Steering System Pump Control Valve (Implement, Steering)
16M Motor Grader Power Train Wheel and Tire (Rear) - Remove and Install
16M Motor Grader Power Train Drive Chain - Install
AccuGrade® Laser (CB420) Full Sensor - Calibrate
16M Motor Grader Power Train Drive Chain - Remove
AccuGrade® Laser (CB420) Module - Flash Program
587R Pipelayer Power Train Transmission Hydraulic Control Valve - Install
Problems with Bias Ply Tires on Specific Off-Highway Trucks{4203} Problems with Bias Ply Tires on Specific Off-Highway Trucks{4203}
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Pilot Hydraulic System
R1600G Load Haul Dump Cooling System Coolant Additive (DEAC) - Add
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Stopping the Engine if an Electrical Malfunction Occurs