Transmission Hydraulic Control Valve - Install
Installation Procedure
- Use two people in order to position transmission hydraulic control valve (6). The weight of transmission hydraulic control valve (6) is approximately 34 kg (75 lb). Install bolts (5). Tighten bolts (5) to a torque of 48 ± 4 N·m (35 ± 3 lb ft).
Show/hide table
 | |
| Illustration 1 | g01388841 |
- Position cable assembly (3). Install bolts (4) .
Show/hide table
 | |
| Illustration 2 | g01388829 |
- Position cable assembly (2). Install bolts (1) .
End By: Install the priority valve. Refer to Disassembly and Assembly, "Priority Valve - Install".
Caterpillar Information System:
AccuGrade® Laser (CB420) Module - Flash Program
16M Motor Grader Power Train Drive Chain - Remove
AccuGrade® Laser (CB420) Full Sensor - Calibrate
16M Motor Grader Power Train Drive Chain - Install
16M Motor Grader Power Train Wheel and Tire (Rear) - Remove and Install
24M Motor Grader Hydraulic and Steering System Pump Control Valve (Implement, Steering)
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Loader)
587R Pipelayer Power Train Transmission Hydraulic Control Valve - Remove
EquipmentManager Dealer Administrator Manual Enable Program
770 and 772 Off-Highway Truck/Tractors Metering Pump (Steering) - Remove and Install
0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225} 0R-9393 Cylinder Pack Gp Piston Ring Position on Certain C16, 3406E, and 3456 Engines{1215, 1225}
584 and 584HD Forwarders Slope Operation
Problems with Bias Ply Tires on Specific Off-Highway Trucks{4203} Problems with Bias Ply Tires on Specific Off-Highway Trucks{4203}
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Pilot Hydraulic System
R1600G Load Haul Dump Cooling System Coolant Additive (DEAC) - Add
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Stopping the Engine if an Electrical Malfunction Occurs
541 Track Feller Buncher, 551 Track Feller Buncher and 552 Track Feller Buncher Machine Systems Pump Flow - Test
Cleaning the Compression Brake{1129} Cleaning the Compression Brake{1129}
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader Plate Locations and Film Locations
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Engine Starting
2007/06/25 Engine Identification Plate {7557}
216B2, 226B2, 232B2, 236B2, 242B2 and 252B2 Skid Steer Loaders Operation Information
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader Cooling System Coolant Extender (ELC) - Add
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader Cooling System Level - Check