Final Drive, Steering Clutch and Brake - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 8T-3207 | C Frame Assembly | 1 |
6V-8199 | Bolt | 2 | |
2J-3506 | Nut | 2 | |
5P-8248 | Washer | 4 |
- Install O-ring seal (7). Install O-ring seal (6).
Show/hide table
Illustration 2 g01372212 - Adjust Tooling (A), as shown.
Show/hide table
Illustration 3 g01372206 Show/hide tableIllustration 4 g01372209 - Install Tooling (A) and a suitable lifting device to final drive assembly (2). The weight of final drive assembly (2) is approximately
953 kg (2100 lb) . Position Tooling (A), as shown. Install final drive assembly (2). Install bolts (3) and bolts (4). Tighten bolts (3) to a torque of745 ± 88 N·m (550 ± 65 lb ft) .Show/hide tableIllustration 5 g01372205 - Lubricate the threads of bolts (1). Install bolts (1). Tighten bolts (1) to a torque of
406 ± 68 N·m (300 ± 50 lb ft) . Then, turn bolts (1) for an additional 120 degrees. - Fill the final drive and the transmission with oil. Refer to Operation and Maintenance Manual , "Final Drive and Transmission Oil - Change".
- Install the ladder on the left side. Refer to Disassembly and Assembly, "Ladder - Install ".
- Move the counterweight to the operating position.
Show/hide table
Illustration 1 | g01372215 |
End By:
- Install the drive axles. Refer to Disassembly and Assembly, "Drive Axle - Install ".
- Connect the track. Refer to Disassembly and Assembly, "Track - Connect ".
Caterpillar Information System:
AP655D and BG655D Asphalt Pavers Tracks - Inspect
AccuGrade® GPS (CD700) Configuration
The Hydraulic Float Function For the Three-Point Hitch is Causing Poor Actuation.{5051, 5702, 5705} The Hydraulic Float Function For the Three-Point Hitch is Causing Poor Actuation.{5051, 5702, 5705}
587R Pipelayer Power Train Final Drive, Steering Clutch and Brake - Remove
AP655D Asphalt Paver Engine Starting
AccuGrade® GPS (CD700) Sloping Surface Design
160M Motor Grader Engine Supplement Engine Enclosure (Hood) - Install
160M Motor Grader Engine Supplement Engine Enclosure (Hood) - Remove
2007/04/30 An Improved Starting Motor is Now Available {1453}
AccuGrade® GPS (CD700) Level Surface Design
938H Wheel Loader and IT38H Integrated Toolcarrier Steering System Breaker Relief Valve
2007/06/04 Improvements to the Water Lines Groups {1380}
450E Backhoe Loader Engine Supplement Hydraulic Oil Cooler - Remove and Install
16M Motor Grader Engine Supplement Rear Chassis Support - Remove
16M Motor Grader Engine Supplement Rear Chassis Support - Install
2007/05/14 A New Breaker for the Heating and Air Conditioning System Is Now Used {1417}
450E Backhoe Loader Engine Supplement Fuel Cooler - Remove and Install
450E Backhoe Loader Engine Supplement Radiator - Remove and Install
2007/08/20 A New Pin in the Bottom of the Swing frame Can Improve Reliability on Certain Backhoe Loaders {6506}
2007/05/28 The Dimensions for Machining the Internal Spline on the Rear Brake Anchors Have Changed {4251, 4267}
450E Backhoe Loader Engine Supplement Aftercooler - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Pump and Motor (Secondary Steering)
AccuGrade® GPS (CD700) General Information
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Monitoring System