Engine - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
Start By:
- Remove the radiator, the air cooler, and the hydraulic oil cooler. Refer to Disassembly and Assembly, "Radiator, Air Cooler, and Hydraulic Oil Cooler - Remove".
- Loosen clamp (2) and remove hose (1) .
Show/hide table
Illustration 1 | g01371020 |
- Loosen clamp (3) and remove hose (4) .
- Remove bolts (6) and air cleaner assembly (5) .
Show/hide table
Illustration 2 | g01371040 |
- Loosen bolts (9) and lower the exhaust clamp on the pipe.
Show/hide table
Illustration 3 | g01371041 |
- Remove bolts (8) and muffler (7) .
- Disconnect harness assemblies (12) and (13) from alternator (10) .
Show/hide table
Illustration 4 | g01371043 |
- Disconnect cable assembly (11) from alternator (10) .
- Remove cable straps (14) and (15) .
Show/hide table
Illustration 5 | g01371047 |
- Disconnect harness assemblies (16) and (17) .
- Disconnect harness assembly (18) .
Show/hide table
Illustration 6 | g01371049 |
- Remove bolt (20), bolt (23), and belt guard (21).
Show/hide table
Illustration 7 | g01371114 |
- Loosen bolts (19) and (25) and push air conditioner compressor (22) toward the engine in order to loosen belt (24) .
- Remove bolts (19) and (25) and lay air conditioner compressor (22) out of the way.
- Remove bolt (26), bolt (27), and the clamps. Move the harness assemblies and cable assemblies out of the way.
Show/hide table
Illustration 8 | g01371187 |
- Remove bolt (28) and the clamp.
Show/hide table
Illustration 9 | g01371269 |
- Remove nut (30) and cable harness (31) from electric starting motor (29) .
Show/hide table
Illustration 10 | g01371271 |
- Remove cable strap (33) .
- Remove screw (35) and cable harness (32) from electric starting motor (29) .
- Remove cable harness (34) from electric starting motor (29) .
- Remove cable strap (36). Disconnect harness assembly (37) .
Show/hide table
Illustration 11 | g01371963 |
- Remove cable strap (38). Disconnect harness assembly (39) .
- Loosen clamp (41) and remove hose (47) .
- Loosen clamp (43) and remove hose (46) .
- Loosen clamp (42) and remove hose (44) .
- Disconnect hose assembly (45) .
- Remove cable straps (48) and move the harness assembly out of the way.
Show/hide table
Illustration 12 | g01371289 |
- Attach a suitable lifting device and Tooling (A) to engine (49) .
Show/hide table
Illustration 13 | g01371983 |
Show/hide table
Illustration 14 | g01371991 |
- Remove bolts (51) from the rear of engine (49) .
- Remove bolts (50) and remove engine (49) from the machine. The weight of engine (49) is approximately 284 kg (625 lb).
Caterpillar Information System:
CP54 and CS54 Vibratory Soil Compactors Engine Supplement Refrigerant Condenser - Remove and Install
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) MID 053 - CID 1273 - FMI 14
CB14 and CB14 XW Vibratory Compactor Machine Systems Air Cleaner
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) MID 053 - CID 0800 - FMI 14
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) MID 053 - CID 0800 - FMI 09
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) MID 053 - CID 0590 - FMI 14
CB14 and CB14 XW Vibratory Compactor Propel System Direction and Speed Control
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) MID 053 - CID 0533 - FMI 14
773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) MID 053 - CID 0533 - FMI 09
Installation of Shut Off Valves for a Thumb on a Backhoe Loader{1329, 6547} Installation of Shut Off Valves for a Thumb on a Backhoe Loader{1329, 6547}
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 157 - CID 1770 - FMI 04
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 157 - CID 1770 - FMI 03
CP54 and CS54 Vibratory Soil Compactors Engine Supplement Engine - Install
450E Backhoe Loader Engine Supplement Side Panel - Remove and Install
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 082 - CID 0977 - FMI 08
450E Backhoe Loader Engine Supplement Electric Starting Motor - Remove and Install
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 039 - CID 0990 - FMI 08
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785} Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
450E Backhoe Loader Engine Supplement Fan Guard - Remove and Install
AP600D, AP655D, BG600D and BG655D Asphalt Pavers MID 156 - CID 1251 - FMI 08
AS3251C Asphalt Screed Electric Heat System
AS3251C Asphalt Screed Machine Preparation for Troubleshooting
AS3251C Asphalt Screed Visual Inspection
AS3251C Asphalt Screed Sloper - Check and Adjust