AP655D Asphalt Paver Machine Systems Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g01362205

1. Attach a suitable lifting device to pump drive (1). The weight of pump drive (1) is approximately 131 kg (289 lb). Install pump drive (1). Install the clips, the washers, and bolts (6) to both sides of pump drive (1).
   Show/hide table

   Illustration 2	g01362207

2. Connect hose (4) to pump drive (1) and tighten clamp (5).
   Show/hide table

   Illustration 3	g01362208

3. Raise pump drive (1) slightly. Remove the suitable blocks from engine (2). Lower engine (2). Tighten bolts (3) on both side of pump drive (1).
   Show/hide table

   Illustration 4	g01362210

4. Remove Tooling (A) from pump drive (1).

End By:

1. Install the piston pump (left propel). Refer to Disassembly and Assembly, "Piston Pump (Left Propel) - Install".

2. Install the piston pump (right propel). Refer to Disassembly and Assembly, "Piston Pump (Right Propel) - Install".