AS3251C Asphalt Screed Caterpillar

Illustration 1	g01361924
Main Operator Console

Illustration 2	g01361905
Right control box

Move switch (1) upward in order to turn on the vibratory system. Move dial (2) above the minimum setting in order to turn on the vibratory system.

Move switch (1) downward or turn knob (2) counterclockwise in order to turn off the vibratory system.

Note: In order to turn on the screed vibrators from the operator console, the knob in the screed control box must be turned on. If either switch is in the OFF position, the vibrators will not work.

Note: There are two knobs that control the vibrators. One knob is located on the left control box. The other knob is located on the right control box.