Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Install
Installation Procedure
- Attach Tooling (A) and a suitable lifting device to cooling system package (33) . The weight of cooling system package (33) is approximately 283 kg (625 lb).
Show/hide table
Illustration 1 | g01340401 |
Show/hide table
Illustration 2 | g01340453 |
- Use the suitable lifting device in order to install cooling system package (33) . Install bolts (34) to each side of cooling package (33) .
- Connect harness assembly (32) .
Show/hide table
Illustration 3 | g01340400 |
- Slide hose (29) off tube (31) into position. Tighten clamps (30) .
Show/hide table
Illustration 4 | g01340399 |
Note: Install ATAAC tube (31) so that a minimum of 10 mm (0.39 inch) is maintained between the ATAAC tube (31) and the washer for the left rear engine mount.
- Connect clip (28) .
Show/hide table
Illustration 5 | g01340398 |
- Connect clip (26) and hose (27) .
Show/hide table
Illustration 6 | g01340360 |
- Install oil filler cap (23) . Pull grommets (24) and (25) through the radiator shroud into position.
Show/hide table
Illustration 7 | g01340358 |
- Install bracket (22) .
Show/hide table
Illustration 8 | g01340355 |
- Pull hose (21) through the radiator shroud. Connect hose (21) to the bottom of the expansion tank.
Show/hide table
Illustration 9 | g01340354 |
- Connect clips (19) and (20) .
Show/hide table
Illustration 10 | g01340352 |
- Connect hose assemblies (17) and (18) .
Show/hide table
Illustration 11 | g01340349 |
- Slide hose (15) off tube (13) into position. Tighten clamps (14) and (16) .
Show/hide table
Illustration 12 | g01340285 |
- Slide hose (11) off tube (9) into position. Tighten clamps (10) and (12) .
Show/hide table
Illustration 13 | g01340282 |
- Connect hose assembly (8) .
Show/hide table
Illustration 14 | g01340276 |
- Connect hose assemblies (6) and (7) to the fuel cooler.
Show/hide table
Illustration 15 | g01340237 |
- Position refrigerant condenser (5) and install bolts (4) .
Show/hide table
Illustration 16 | g01340225 |
- Engage latch (3) .
Show/hide table
Illustration 17 | g01340223 |
- Connect hose assemblies (1) and (2) .
Show/hide table
Illustration 18 | g01340221 |
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
End By: Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Caterpillar Information System:
770 and 772 Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
2007/01/15 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {1261}
2007/01/22 Correction to Operation and Maintenance Manual , "Maintenance Interval Schedule" {1261}
770 and 772 Off-Highway Truck Suspension Cylinder Front Suspension (Cylinder)
2007/01/15 Correction to Operation and Maintenance Manual , "Fuel System Secondary Filter - Replace" {1261}
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2204 - FMI 13
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2204 - FMI 08
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2204 - FMI 04
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2204 - FMI 03
777G Off-Highway Truck Machine Systems Cab - Install
572R Series II Pipelayer Schematic
279C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Engine Supplement Aftercooler - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Belt Tensioner - Remove and Install
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Electrical Connectors
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Water Pump - Remove and Install
2007/04/09 A New Retainer Improves the Field Service of the Hydraulic Oil Filter and Mounting Group {3004, 3067, 5068}
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Disassemble - High Flow
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Assemble - High Flow
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Suction Fan (Fan and Fan Motor) - Remove
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Suction Fan (Fan and Fan Motor) - Install
777D Off-Highway Truck Fuel System - Fill
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Gear Motor (Hydraulic Fan) - Disassemble
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Gear Motor (Hydraulic Fan) - Assemble
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Alternator - Remove and Install