Engine Oil Pan - Disassemble - C175-20
拆解步骤
开始:
- 拆下发动机机油滤网。 请参阅拆解和组装, "发动机机油滤网 - 拆卸和安装"。
- 拆下发动机油底壳。 请参阅拆解和组装, "发动机油底壳 - 拆卸"。
Show/hide table
| 注意 |
|---|
在进行检验、保养、测试、调整及维修产品期间，必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前，要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品，请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 根据应用拆下密封垫组件或密封件 (1) 。
Show/hide table
 | |
| 图 1 | g03679938 |
- 用适当的支座支撑油底壳组件。 拆下螺栓 (3) 后拆下油底壳部分 (2) 。
Show/hide table
 | |
| 图 2 | g03679931 |
- 拆下密封垫或密封件 (5) 。 拆下螺栓 (6) 后拆下油底壳部分 (4) 。 拆下密封垫或密封件 (7) 。
Show/hide table
 | |
| 图 3 | g03679932 |
Show/hide table
 | |
| 图 4 | g03680154 |
- 将螺栓 (8) 和发动机机油滤网壳体 (9) 从油底壳部分 (12) 上拆下。
Show/hide table
 | |
| 图 5 | g03679942 |
- 拆下螺栓 (10) ，然后拆下盘 (11) 。
Caterpillar Information System:
14M Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
14M Motor Grader Engine Supplement Air Cleaner - Remove and Install
773D Off-Highway Truck Steering System Oil Filter (Steering)
773D Off-Highway Truck Air System and Brakes Pump and Motor (Secondary Steering and Brake Release)
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Noise - Noisy Operation
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines System Configuration Parameters
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Flash Programming
14M Motor Grader Engine Supplement Refrigerant Condenser - Remove and Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Factory Passwords
777D and 777E Off-Highway Truck Steering System Hydraulic Tank (Steering)
2006/11/20 Caterpillar Genuine Rollers Are Replaced By Caterpillar Classic Rollers {4180}
777D and 777E Off-Highway Truck Air System and Brakes Air Flow Schematic
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Will Not Charge - Charging Problem
773D Off-Highway Truck Steering System Check and Relief Valve (Steering)
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Assemble - C175-20
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Install - C175-16
450E Backhoe Loader Axle Breathers - Clean/Replace
777G Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
2006/11/20 New Pressure Reducing Valve Improves Service Life {5117, 5264}
Installing the 299-3915 Sprocket Kit (ARC) and the 299-3916 Sprocket Kit (XR){4062, 4164} Installing the 299-3915 Sprocket Kit (ARC) and the 299-3916 Sprocket Kit (XR){4062, 4164}
14M Motor Grader Engine Supplement Electric Starting Motor - Remove and Install
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Remove
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Reducing Valve (Steering)
770 and 772 Off-Highway Trucks Power Train General Information