Engine Oil Pan - Install - C175-16
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 1U-7505 | 变速箱千斤顶 | 2 |
| B | - | Loctite Superflex 596 高温 RTV 硅粘合剂 |
- |
| C | - | Loctite 243 螺纹锁固胶，中等强度、表面不敏感 |
- |
- 在前壳体和缸体接合以及后壳体和缸体接合的 T 型接头处涂抹一条 3 mm (0.11811 in) 至 5 mm (0.19685 in) 宽的工具 (B) 缝。
注: 涂抹工具 (B) 的 10 分钟内必须完全安装发动机油底壳。
- 使用工具 (A) 将发动机油底壳 (16) 安装到缸体上。 将工具 (C) 涂覆到螺栓 (15) 上。 安装并拧紧螺栓 (15) ，使扭矩达到 100 ± 20 N·m (74 ± 15 lb ft)。
Show/hide table
| 图 1 | g03679151 |
- 安装发动机油底壳后，将工具 (C) 涂抹到缸体裙部螺栓孔上。 工具 (C) 可防止污物、碎屑和水分损坏螺纹。
Show/hide table
 | |
| 图 2 | g03419059 |
- 拧紧螺栓 (9) 。 定位软管 (10) 后安装螺栓 (12) 。 定位支架 (14) ，然后安装螺母 (11) 和 (13) 。
Show/hide table
| 图 3 | g03678036 |
- 拧紧螺栓 (8) 。
Show/hide table
 | |
| 图 4 | g03678034 |
- 拧紧螺栓 (7) 。
Show/hide table
 | |
| 图 5 | g03678033 |
- 安装交流发电机盖 (6) 。
Show/hide table
 | |
| 图 6 | g03678032 |
- 用未使用过的清洁发动机机油润滑 O 形密封圈和孔。 安装管组件 (5) 。
Show/hide table
 | |
| 图 7 | g03678031 |
- 连接线束组件 (4) 。
Show/hide table
 | |
| 图 8 | g03678028 |
- 安装支架 (1) 和 (3) 。 安装管组件 (2) 。
Show/hide table
| 图 9 | g03678026 |
- 将机油加注到发动机中。 有关正确的加注步骤，请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
Caterpillar Information System:
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Assemble - C175-20
773D Off-Highway Truck Steering System Check and Relief Valve (Steering)
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Will Not Charge - Charging Problem
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Disassemble - C175-20
14M Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
14M Motor Grader Engine Supplement Air Cleaner - Remove and Install
773D Off-Highway Truck Steering System Oil Filter (Steering)
773D Off-Highway Truck Air System and Brakes Pump and Motor (Secondary Steering and Brake Release)
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Noise - Noisy Operation
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines System Configuration Parameters
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Flash Programming
14M Motor Grader Engine Supplement Refrigerant Condenser - Remove and Install
450E Backhoe Loader Axle Breathers - Clean/Replace
777G Off-Highway Truck Power Train Transmission Hydraulic Control - Assemble
2006/11/20 New Pressure Reducing Valve Improves Service Life {5117, 5264}
Installing the 299-3915 Sprocket Kit (ARC) and the 299-3916 Sprocket Kit (XR){4062, 4164} Installing the 299-3915 Sprocket Kit (ARC) and the 299-3916 Sprocket Kit (XR){4062, 4164}
14M Motor Grader Engine Supplement Electric Starting Motor - Remove and Install
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Power Train Piston Motor (Hydrostatic) - Remove
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Pressure Reducing Valve (Steering)
770 and 772 Off-Highway Trucks Power Train General Information
773E Off-Highway Truck Steering System Relief Valve (Secondary Steering Backup)
773F Off-Highway Truck and 775F Quarry Truck Power Train Final Drive - Remove
773F Off-Highway Truck and 775F Quarry Truck Power Train Final Drive - Install
C13 and C15 On-highway Engines Oil Contains Coolant