Caterpillar Genuine Rollers Are Replaced By Caterpillar Classic Rollers {4180}
- Track-Type Tractor:
- D8K (S/N: 66V1-UP; 76V1-UP; 77V1-UP)
- Track-Type Tractor:
- D8H (S/N: 36A1-UP; 46A1-UP; 52A1-UP; 68A1-UP)
- Pipelayer:
- 583 (S/N: 38A1-UP; 61A1-UP; 78V1-UP)
Caterpillar Genuine rollers are being replaced by Caterpillar Classic rollers for the following machines:
- D8K (S/N: 66V1-UP; 76V1-UP; 77V1-UP)
- D8H (S/N: 36A1-UP; 46A1-UP; 52A1-UP,68A,1-UP)
- 583 (S/N: 38A1-UP; 61A1-UP; 78V1-UP)
Show/hide table
| Affected Part Numbers | |||
| Type | Old Part Number Genuine | New Part Number Classic | Mounting Bolts |
| Single Flange | 9P-3308 | 281-6380 | 7/8 inch |
| Double Flange | 9P-3309 | 281-6386 | 7/8 inch |
| Single Flange | 6P-4897 | 188-5607 | 1 inch |
| Double Flange | 6P-4898 | 188-5608 | 1 inch |
| Single Flange High/Low temperature |
7G-8810 | 188-5607 (1) | 1 inch |
| Double Flange High/Low temperature |
7G-8809 | 188-5608 (1) | 1 inch |
Show/hide table
| ( 1 ) | Applications for High/Low temperature require that you use the standard Classic rollers 188-5607 and 188-5608 plus the removal of all rubber seals and the installation of the High/Low rubber seals as defined in Table 2. You must also replace the existing oil with 0.514 L (0.136 US gal) of 5W-40synthetic diesel engine oil. |
Show/hide table
| Seals For Applications With High/Low Temperature | |||
| Part Number | Description | Quantity | Function |
| 8S-5653 | Sealing Ring | 4 | Duo-cone seal gp |
| 4S-5898 | O-Ring Seal | 2 | Bushing |
| 2P-2975 | O-Ring Seal | 1 | Plug |
| 5M-3038 | O-Ring Seal | 2 | Shaft |
Note: The parts that are listed in Table 2 will do one roller.
Caterpillar Information System:
777D and 777E Off-Highway Truck Air System and Brakes Air Flow Schematic
777D and 777E Off-Highway Truck Air System and Brakes Brake Hydraulic System
14M Motor Grader Engine Supplement Alternator - Remove and Install
777D and 777E Off-Highway Truck Air System and Brakes Air System
773F Off-Highway Truck and 775F Quarry Truck Power Train Rear Wheel, Bearing, and Duo-Cone Seal - Install
773F Off-Highway Truck and 775F Quarry Truck Power Train Rear Wheel, Bearing, and Duo-Cone Seal - Remove
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Wiring Information
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2014/06/03 New Water Pump, Water Temperature Regulator and Bypass Tube {1355, 1361}
R1700G Load Haul Dump Caterpillar Monitoring System
R2900G Load Haul Dump Machine Systems Bucket Control Safety Pins - Remove and Install
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Machine Systems Front Frame from Rear Frame - Separate
777D and 777E Off-Highway Truck Steering System Hydraulic Tank (Steering)
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Factory Passwords
14M Motor Grader Engine Supplement Refrigerant Condenser - Remove and Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Flash Programming
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines System Configuration Parameters
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Noise - Noisy Operation
773D Off-Highway Truck Air System and Brakes Pump and Motor (Secondary Steering and Brake Release)
773D Off-Highway Truck Steering System Oil Filter (Steering)
14M Motor Grader Engine Supplement Air Cleaner - Remove and Install
14M Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Disassemble - C175-20
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Will Not Charge - Charging Problem