Illustration 1 | g01369342 |
The "Operator" menu allows the user to perform the following:
- Select a profile.
- Create a profile.
- Delete a profile.
- Edit a current profile.
- Save a current profile.
The profile of an operator is a saved set of preferences that is identified by a name. Once the profile is created, the operator may associate various display settings and settings for the power train to that profile. After all of the parameters have been adjusted to the preference of the operator, you may then save the parameters for future usage.
Illustration 2 | g01301164 |
The profile of the operator is entered by selecting "Operator" from the "Home" menu. Press the up arrow button or the down arrow button until "Operator" is highlighted. Then press the "OK" button. Refer to Illustration 1.
Note: The "Home Menu" can be displayed from any screen by pressing the "Home" button.
The following screen will now be displayed.
Illustration 3 | g01306996 |
The "Operator" menu contains the following options:
- "Select Profile"
- "Edit/Save Current"
- "Create Profile"
- "Delete Profile"
- "Factory Set"
To access the "Operator" menu option, press the up arrow button or the down arrow button until the desired category is highlighted. Then press the "OK" button. The following explains the usage of each menu option.
Select a Profile
From the "Operator" menu, use the appropriate arrow button to highlight the "Select Profile" option. Then press the "OK" button in order to display a list of existing profiles. Again, use the appropriate arrow button to highlight the desired profile. Then press the "OK" button in order to select that profile.
Note: A maximum of 10 profiles may be used.
Create a Profile
From the "Operator" menu, use the appropriate arrow button to highlight the "Create Profile" option. Then press the "OK" button in order to display the "Create Profile" screen. Follow the screens in order to create a new name. The screen will give directions in order to save the name to the list of profiles. This procedure creates a profile. The "Settings" menu can then be used to adjust parameters. These parameters may then be saved to the new profile that is using the "Edit/Save Current" option.
Note: A maximum of 10 profiles may be used.
Delete a Profile
From the "Operator" menu, use the appropriate arrow button to highlight the "Delete Profile" option. Then press the "OK" button in order to display a list of existing profiles. Use the appropriate arrow button to highlight the profile for deleting. Then press the "OK" button in order to delete that profile. This procedure deletes the selected profile from the list of stored profiles.
Edit/Save Current
From the "Operator" menu, use the appropriate arrow button to highlight the "Edit/Save Current" option. Then, press the "OK" button in order to view the settings that are associated with the current profile.
This procedure will cause the current settings of the selected profile to be displayed on the screen. The settings that are displayed are the current settings.
The operator may exit this display without saving by pressing the back button. The operator may save the settings to memory by selecting "SAVE" and then pressing the "OK" button. The settings will not change unless you successfully save the settings.
Factory Set
From the "Operator" menu, use the appropriate arrow button to highlight the "Factory Set" option. Then press the "OK" button in order to make the default settings active.
This procedure recalls the default settings. The default settings are then the active settings and the Advisor display and the instrument cluster will reflect the default settings. Once the default settings have been activated, the settings may be viewed without saving using the "Edit/Save Current" option.
The default settings will not be saved with the current profile unless the operator saves the default settings to a profile by using the "Edit/Save Current" option.