814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Caterpillar

Brake Control Valve (Service)

Usage:

814F II BXG

The 814F Series 2 Wheel Dozer is equipped with standard service brakes on the fixed axle (front) and the oscillating axle (rear). The part number for the service brake control valve on this machine is 130-4917 Brake Control Valve. The service replacement for the 130-4917 Brake Control Valve is 201-3198 Brake Control Valve .

The 815F Series 2 Soil Compactor and the 816F Series 2 Landfill Compactor are equipped with standard service brakes on the fixed axle (front). The part number for the service brake control valve on these machines is 194-7658 Brake Control Valve.

Show/hide table




Illustration 1	g00874062
130-4917 Brake Control Valve (Service) (1) Return ports to the hydraulic oil tank (2) Supply ports from the brake accumulator charging valve (3) Supply ports to the service brakes

(A) Height of installed valve ... 29.7 mm (1.17 inch)

(B) Height of the valve with the service brake in the FULLY APPLIED position ... 20.6 mm (.81 inch)

Service brake pressure ... 6900 ± 350 kPa (1000 ± 50 psi)

Note: The output pressure of the upper port will be approximately 350 kPa (51 psi) higher than the output pressure of the lower port.

Show/hide table




Illustration 2	g00874096
194-7658 Brake Control Valve (Service) (4) Return port to the hydraulic oil tank (5) Supply port to the service brakes (6) Supply port from the brake accumulator charging valve

(C) Height of installed valve ... 29.7 mm (1.17 inch)

(D) Height of the brake control valve with the service brake in the FULLY APPLIED position ... 22.4 mm (.88 inch)

Service brake pressure ... 6900 ± 350 kPa (1000 ± 51 psi)

Caterpillar Information System:

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes Module is Off-Line IQAN XT2 A0

3524B and C175 Engines for Off-Highway Truck/Tractors Engine Design

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes Module is Off-Line IQAN XP2 A1

120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1482 - FMI 04

120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1482 - FMI 03

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes Module is Off-Line IQAN XP2 A0

C15 and C18 Petrolem Generator Set Engines Coolant Contains Oil

Installation of the AccuGrade® Electronic Components{7220} Installation of the AccuGrade® Electronic Components{7220}

793D Off-Highway Truck/Tractor Accumulator (Steering) - Install

793D Off-Highway Truck/Tractor Accumulator (Steering) - Remove

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes Module is Off-Line IQAN Lx A1

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes VREF-A Error IQAN XT2 A0

CAESultra D3:C4 Nav 10.4 Display

CAESultra Measuring Points (Productivity)

CAESultra Entering Service Hours and Fuel Entered

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes High Temperature IQAN Lx A1

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes High Temperature IQAN XP2 A0

C11 and C13 Engines and 14M and 16M Motor Graders Retarder - Test

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes High Temperature IQAN XP2 A1

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes High Temperature IQAN XT2 A0

814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Accumulator Charging Valve (Brake)

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes CAN Error: Polarity IQAN Lx A1

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes CAN Error: Polarity IQAN XP2 A0

TK711, TK721, TK722, TK732, TK741, TK751 and TK752 Track Feller Bunchers IQAN MDM Monitor Fault ; Event Codes CAN Error: Polarity IQAN XP2 A1