Valve Guides
Usage:
Remove Valve Guides
Start By:
a. remove valves
1. Use tool (A) to remove the valve guides.
Install Valve Guides
1. Put clean engine oil on the outside of the valve guide.
2. Use tooling (A) to install the valve guides.
3. After installation, the inside diameter of the valve guide must be 9.487 ± 0.025 mm (.3735 ± .0010 in.). The maximum diameter of used guides is 8.538 mm (.3361 in.).
End By:
a. install valves
Caterpillar Information System:
3406B (PEEC) DIESEL TRUCK ENGINE Bridge Dowels
3406B (PEEC) DIESEL TRUCK ENGINE Valve Seat Inserts
3406B (PEEC) DIESEL TRUCK ENGINE Valves
3406B (PEEC) DIESEL TRUCK ENGINE Spacer Plate
3406B (PEEC) DIESEL TRUCK ENGINE Cylinder Head Assembly
3406B (PEEC) DIESEL TRUCK ENGINE Fuel Injection Nozzles and Adapters
3406B (PEEC) DIESEL TRUCK ENGINE Valve Lifters
3406B (PEEC) DIESEL TRUCK ENGINE Rocker Shaft Assemblies
3406B (PEEC) DIESEL TRUCK ENGINE Rocker Shaft Assemblies And Push Rods
3406B (PEEC) DIESEL TRUCK ENGINE Air Compressor And Accessory Drive
3406B (PEEC) DIESEL TRUCK ENGINE Timing Gears and Plate
3406B (PEEC) DIESEL TRUCK ENGINE Timing Gear Cover
3406B (PEEC) DIESEL TRUCK ENGINE Oil Pan
3406B (PEEC) DIESEL TRUCK ENGINE Flywheel
3406B (PEEC) DIESEL TRUCK ENGINE Flywheel Housing
3406B (PEEC) DIESEL TRUCK ENGINE Oil Pump
3406B (PEEC) DIESEL TRUCK ENGINE Piston Cooling Tubes
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft
3406B (PEEC) DIESEL TRUCK ENGINE Camshaft Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Connecting Rod Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Main Bearings
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
3406B (PEEC) DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve